EET-ED2W471EA Datasheet, PDF (1/5 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ ED

Aluminum Electrolytic Capacitors/ ED
Snap-in Type
Series: ED Type : TS
Country of Origin
n Features Endurance: 105°C 3000h
High ripple current capability in
high frequency range.
High ripple current and miniaturization
to help miniaturization of equipment.
RoHS directive compliant
n Specifications
Japan
U.S.A
Malaysia
Category temp. range
-40 to +105°C
-25 to + 105°C
Rated W.V. Range
200,220,250 V.DC
400, 420, 450 V .DC
Nominal Cap. Range
220 to 2200 µF
56 to 560 µ F
Capacitance Tolerance
±20 % (120Hz/+20°C)
DC Leakage Current
3√CV ^{(µA) max. after 5 minutes application of rated working voltage at +20°C}
C:Capacitance(µF) V: W.V. (V.DC)
tan δ
Please see the attached standard products list
Frequency Correction
Factor for Ripple Current
Frequency (Hz)
50
60
100 120
500
1k 10k to
Correction Factor 0.5
0.55
0.68 0.70 0.85 0.90 1.00
After 3000 hours application of DC voltage with specified ripple current (< rated DC working
voltage) at +105°C, the capacitor shall meet the following limits.
Endurance
Capacitance change ±20 % of initial measured value
tan δ
< 200 % of initial specified value
DC leakage current < initial specified value
Shelf Life
After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance(With voltage treatment)
n Dimensions in mm (not to scale)
Polarity bar PET Sleeve
Vent
(10.0) 2-φ2.0±0.1
10.0±0.1
L+2.0 max
0.8 -^+00..12
4.0± 0.5
Recommended PWB piercing plan
2.0max
Terminal
(t= 0.8)
Bottom of can
1.5 ± 0.2
Standard terminal type does not require
terminal trimming process.
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately.
Mar.2006
— EE127 —