EEFHX0D471R Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Conductive Polymer Aluminum Electrolytic Capacitors

Conductive Polymer Aluminum Electrolytic Capacitors
Surface Mount Type
Series : HX (Guaranteed at 125 °C)
Features
● _{Endurance 125 °C 1000 h}
● _{High voltage & Large capacitance (2 V.DC 560 μF to 25 V.DC 33 μF)}
● _{Low ESR (4.5 mΩ max.)}
● _{RoHS compliance, Halogen free}
Specifications
Series
HX
Category temp. range
–55 °C to +125 °C
Rated voltage range
2 V.DC to 2.5 V.DC, 10 V.DC to 25 V.DC
Category voltage range
1.6 V.DC to 2 V.DC, 8 V.DC to 20 V.DC
Nominal cap.range
15 μF to 560 μF
Capacitance tolerance
±20 % (120 Hz/+20 °C)
DC leakage current 2 V.DC to 2.5 V.DC : I < 0.1 CV (μA) 2 minutes, 10 V.DC to 25 V.DC : I < 0.3 CV (μA) 2 minutes
Dissipation factor (tan d)
< 0.1 (120 Hz/+20 °C)
Surge voltage (V.DC)
Rated voltage × 1.25 [2 V.DC to 16 V.DC], × 1.15 [20 V.DC to 25 V.DC](15 °C to 35 °C)
+125 °C, 1000 h, rated voltage applied
Endurance
Capacitance change Within ±20 % of the initial value
tan d
< 2 times of the initial limit
DC leakage current Within the initial limit
After storing for 500 hours at +60 °C, 90 %
Damp heat
(Steady state)
Capacitance change of
initial measurd value
2 V.DC to 2.5 V.DC
+70 %, –20 %
tan d
< 2 times of the initial limit
10 V.DC to 25 V.DC
+60 %, –20 %
DC leakage current
2 V.DC to 2.5 V.DC : Within the initial limit
10 V.DC to 25V DC : < 3 times of the initial limit
Marking
Dimensions (not to scale)
Cap.
Polarity bar (Positive)
–
+
P
P
L
W1
Lot No. R.V. code
Rated voltage mark
d
2 V.DC
e
2.5 V.DC
A
10 V.DC
C
16 V.DC
D
20 V.DC
E
25 V.DC
Unit : mm
Series L±0.2 W1±0.2 W2±0.1 H±0.1 P±0.3
HX
7.3 4.3 2.4 1.9 1.3
✽ Externals of figure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Nov. 2015