EEFGX0D331R_16 Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Conductive Polymer Aluminum Electrolytic Capacitors

Conductive Polymer Aluminum Electrolytic Capacitors
Surface Mount Type
Series : GX (Super Low ESR Products)
Features
● _{Large capacitance (560 μF max.)}
● _{Super Low ESR (3 mΩ max.)}
● _{Low ESL ( 3-terminals : 50 % less than 2-terminals) [Suffix : L]}
● _{High ripple current (10200 mAr.m.s. max.)}
● _{RoHS compliance, Halogen free}
Specifications
Series
GX
Category temp. range
–55 °C to +105 °C
Rated voltage range
2 V.DC to 2.5 V.DC
Nominal cap.range
330 μF to 560 μF
Capacitance tolerance
±20 % (120 Hz/+20 °C)
DC leakage current
I < 0.1 CV (μA) 2 minutes
Dissipation factor (tan d)
< 0.06 (120 Hz/+20 °C)
Surge voltage (V.DC)
Rated voltage × 1.25 (15 °C to 35 °C)
+105 °C, 2000 h, rated voltage applied
Endurance
Capacitance change Within ±20 % of the initial value
tan d
< 2 times of the initial limit
DC leakage current < 3 times of the initial limit
+60 °C, 90 %, 500 h, No-applied voltage
Damp heat
(Steady state)
Capacitance change of 2 V.DC to 2.5 V.DC
initial measurd value +70 %, –20 %
tan d
< 2 times of the initial limit
DC leakage current Within the initial limit
Marking
Cap.
Polarity bar (Positive)
Dimensions (not to scale)
2 terminals
–
+
P
P
L
W1
Lot No. R.V. code
3 terminals
Rated voltage mark
d
2 V.DC
e
2.5 V.DC
–
+
L
W1
–
P4
+
Series
GX
L±0.2 W1±0.2 W2±0.1 H±0.1
7.3
4.3
2.4
1.9
✽ Externals of figure are the reference.
Unit : mm
P±0.3
1.3
P1
P3 P2 P1
Unit : mm
Series L±0.2 W1±0.2 W2±0.1 H±0.1 P1±0.3 P2±0.1 P3±0.2 P4±0.2
GX 7.3 4.3 2.4 1.9 1.3 1.1 0.7 1.4
✽ Externals of figure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
05 Nov. 2015