EEFCS0G121R Datasheet, PDF (1/3 Pages) Panasonic Semiconductor – Conductive Polymer Aluminum Electrolytic Capacitors

Conductive Polymer Aluminum Electrolytic Capacitors
Surface Mount Type
Series : CS, CT, CX
Features
● _{High voltage (35 V.DC max.)}
● _{Low profile (Height 1.0 mm max.)}
● _{High ripple current (5600 mAr.m.s. max.)}
● _{RoHS compliance, Halogen free}
Specifications
Series
CS
CT
CX
Category temp. range
–55 °C to +105 °C
Rated voltage range
4 V.DC to 35 V.DC
2 V.DC to 35 V.DC
Nominal cap.range
10 μF to 120 μF
15 μF to 180 μF
15 μF to 560 μF
Capacitance tolerance
±20 % (120 Hz / + 20 °C)
DC leakage current I < 0.1 CV (μA) [2 V.DC to 6.3 V.DC, 2 minutes], I < 0.3 CV (μA) [10 V.DC to 35 V.DC, 2 minutes]
Dissipation factor (tan d)
< 0.06 (120 Hz / + 20 °C)
Surge voltage (V.DC)
Rated voltage × 1.25 [2 V.DC to 16 V.DC], × 1.15 [20 V.DC to 35 V.DC] (15 °C to 35 °C)
+105 °C, 2000 h, rated voltage applied
Endurance
Capacitance change Within ±20 % of the initial value
tan d
< 2 times of the initial limit
DC leakage current
2 V.DC to 6.3 V DC : < 3 times of the initial limit
10 V.DC to 35 V.DC : Within the initial limit
+60 °C, 90 %, 500 h, No-applied voltage
Damp heat
(Steady state)
Capacitance change ^{2 V.DC to 2.5 V.DC}
of initial measurd value
+70 %, –20 %
4 V.DC, 10 V.DC to 35 V.DC
+60 %, –20 %
tan d
< 2 times of the initial limit
DC leakage current
2 V.DC to 6.3 V.DC
10 V.DC to 35V DC
: Within the initial limit
: < 3 times of the initial limit
6.3 V.DC
+50 %, –20 %
Marking
Dimensions (not to scale)
Cap.
Polarity bar (Positive)
–
+
P
P
L
W1
Lot No. R.V. code
Rated voltage mark
d 2 V.DC
j
e 2.5 V.DC A
g 4 V.DC C
6.3 V.DC
10 V.DC
16 V.DC
D 20 V.DC
E 25 V.DC
V 35 V.DC
Series L±0.2 W1±0.2 W2±0.1 H±0.1
CS
7.3 4.3 2.4 1.1
CT
7.3 4.3 2.4 1.4
CX
7.3 4.3 2.4 1.9
✽ Externals of figure are the reference.
Unit : mm
P±0.3
1.3
1.3
1.3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
07 Nov. 2015