EEF-ST0D331R Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – SP-Cap/ Conductive Polymer Aluminum Capacitors (Specialty Polymer Aluminum Capacitors)

SP-Cap/ Conductive Polymer Aluminum Capacitors (Specialty Polymer Aluminum Capacitors)
Surface Mount Type
Series: _{SS, ST, LS, LT, CS, CT}
■ Features
● Low profile 1.1 mm, 1.4 mm
● Low ESR(6 mȑ), Large capacitance (SS, ST, LS, LT series)
● Low ESL by structure of SP-Cap 50% ESL of current products.
(LS, LT series)
● High temperature reflow soldering applicable.
(Peak : 260 °C 10s, main heating : 230 °C 40s)
● RoHS directive compliant
■ Specifications
Series & Size Code
Category Temp. Range
Rated W.V.Range
Nominal Cap.Range
Capacitance Tolerance
DC Leakage Current
tan δ
Surge Voltage
Endurance
Moisture resistance
SS
ST
LS
LT
CS
CT
–40 °C to +105 °C
2 V.DC to 2.5 V.DC
4 V.DC to 6.3 V.DC
180 µF to 220 µF 270 µF to 330 µF 180 µF to 220 µF 270 µF to 330 µF 68 µF to 120 µF 100 µF to 180 µF
±20 % (120 Hz / + 20 °C)
I < 0.1 CV (µA) 2minutes
< 0.06 (120 Hz/+20 °C)
Rated Working Voltage ҂ 1.25 (15 °C to 35 °C)
After applying rated working voltage for 1000 hours at 105 °C±2 °C, and then being stabilized at +20 °C,
capacitor shall meet the following limits.
Capacitance change
±10% of initial measured value
tan δ
< Initial specified value
DC leakage current
< Initial specified value
After storing for 500 hours at 60 °C, 90 %
Capacitance change of initial
measurd value
2, 2.5 V.DC
+70, –20 %
4 V.DC
+60, –20 %
6.3 V.DC
+50, –20 %
tan δ
< 200 % of initial specified value
DC leakage current
< Initial specified value
■ Marking
Cap.
Polarity bar (Positive)
■ Dimensions in mm(not to scale)
SS, ST, CS, CT series
-
+
Lot No. W.V. code
(Unit : mm)
LS, LT series
-
P
P
L
W1
-
(Unit : mm)
+
L
W1
P4
+
Series &
Size Code
SS, CS
ST, CT
L±0.2
7.3
7.3
W1±0.2 W2±0.1
4.3
2.4
4.3
2.4
✽ Externals of figure are the reference.
H±0.1
1.1
1.4
P±0.3
1.3
1.3
P1
P3 P2 P1
Series &
Size Code
L±0.2
W1±0.2 W2±0.1 H±0.1
P1±0.3 P2±0.1 P3±0.2 P4±0.2
LS 7.3 4.3 2.4 1.1 1.3 1.1 0.7 1.4
LT 7.3 4.3 2.4 1.4 1.3 1.1 0.7 1.4
✽ Externals of figure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EEF-2 –
00 Nov. 2012