EEETQV470XAP Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors

Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type
Series : TQ Type : V
High temperature
Lead-Free reflow (suffix : A✽)
Features
● _{1 size smaller and same performance compare with V-TK series}
● _{Low ESR (85 % low ESR in low temperature after endurance compare with V-TP series)}
● _{Endurance : 125 °C 2000 h}
● _{RoHS compliant}
Recommended applications
● _Automotive
Specifications
Category temperature range
–40 °C to +125 °C
Rated voltage range
35 V.DC
Capacitance range
47 µF to 100 µF
Capacitance tolerance
±20 % (120 Hz/+20 °C)
Leakage current
I < 0.01 CV (µA) After 2 minutes
Dissipation factor (tan d)
Please see the attached characteristics list
After the life test with DC rated working voltage at +125 °C±2 °C for 2000 hours,
the capacitors shall meet the limits specified below.
Capacitance change Within ±30 % of the initial value
tan d
< 300 % of the initial limit
Endurance
DC leakage current Within the initial limit
ESR after
endurance
(Ω/100kHz)
Initial (+20 °C)
After 2000 h (-40 °C)
Size Code
D8
0.30
6
Shelf life
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Resistance to
Capacitance change Within ±10 % of the initial value
soldering heat
tan d
Within the initial limit
DC leakage current Within the initial limit
AEC-Q200
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
120
1k
0.65
0.85
10 k
100 k to
0.95
1.00
Marking
Example : 35 V.DC 47 µF
Marking color : BLACK
Negative polarity marking (–)
47
V TQ
Capacitance (µF)
Series
identification
Lot number
R. Voltage
(V.DC)
35
Code
V
Rated
Voltage code
Dimensions
0.3 max.
A±0.2
–
+
L
W
( ) Reference size
Size
code
0D
D8 6.3
L A, B H
I
W
P
7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8
(Unit : mm)
K
0.35
+
-
0.15
0.20
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Mar. 2016