EEETP1A221AP Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors

Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type
Series : TP Type : V
High temperature
Lead-Free reflow (suffix : A✽)
Features
● _{Lower ESR at Low temperature after endurance}
● _{Endurance : 125 °C 3000 h (D8 size : 2000 h)}
● _Automotive
● _{Vibration-proof product is available upon request. (08 mm and larger)}
● _{RoHS compliant}
Specifications
Category temperature range
–40 °C to +125 °C
Rated voltage range
10 V.DC to 35 V.DC
Capacitance range
47 µF to 470 µF
Capacitance tolerance
±20 % (120 Hz/+20 °C)
Leakage current
I < 0.01 CV (µA) After 2 minutes
Dissipation factor (tan d)
Please see the attached characteristics list
After the life test with DC rated working voltage at +125 °C±2 °C for 3000 hours (D8 size : 2000 h).
the capacitors shall meet the limits specified below.
Capacitance change Within ±30 % of the initial value
tan d
< 300 % of the initial limit
Endurance
DC leakage current Within the initial limit
ESR after
endurance
(Ω/100kHz)
Initial (+20 °C)
After 2000 h (-40 °C)
Size Code
D8
F
G
0.45 0.2 0.15
40
4.5
3.5
Shelf life
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Resistance to
Capacitance change Within ±10 % of the initial value
soldering heat
tan d
Within the initial limit
DC leakage current Within the initial limit
AEC-Q200
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
120
1k
0.65
0.85
10 k
100 k to
0.95
1.00
Marking
Example : 10 V.DC 220 µF
Marking color : BLACK
Negative polarity
marking (–)
220
A TP
Lot number
Capacitance (µF)
Series identification
Mark for Lead-Free
products
(Black dot)
Rated voltage code
R. Voltage
(V.DC)
10
16
25
35
Code
A
C
E
V
Dimensions
0.3 max.
A±0.2
–
+
L
Pressure Relief (010 and larger)
W
( ) Reference size
Size
code
0D
L A, B H
I
D8 6.3 7.7±0.3 6.6 7.8 max. 2.6
F 8.0 10.2±0.3 8.3 10.0max. 3.4
G 10.0 10.2±0.3 10.3 12.0max. 3.5
W
0.65±0.1
0.90±0.2
0.90±0.2
(Unit : mm)
P
K
1.8
0.35
+
-
0.15
0.20
3.1 0.70±0.20
4.6 0.70±0.20
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Mar. 2016