EEETK1A221P Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors

Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type
Series : TK Type : V
Features
● _{Endurance : 125 °C 3000 h}
● _{Low ESR at –40 °C (50 % lower than TG series)}
● _{Added ESR specification after the endurance test}
● _{Vibration-proof product is available upon request.}
● _{RoHS compliant}
Specifications
Category temperature range
–40 °C to +125 °C
Rated voltage range
10 V.DC to 35 V.DC
Capacitance range
47 µF to 470 µF
Capacitance tolerance
±20 % (120 Hz/+20 °C)
Leakage current
I < 0.01 CV After 2 minutes
Dissipation factor (tan d)
Please see the attached characteristics list
V.DC
10 16 25 35
Characteristics
at low temperature
Z(–25 °C)/Z(+20 °C)
3
2
2
2
Z(–40 °C)/Z(+20 °C) 4
3
3
3
(Impedance ratio at 120 Hz)
After the life test with DC rated woking voltage at +125 °C ±2 °C for 3000 hours, the capacitors
shall meet the limits specified below.
Endurance
Capacitance change Within ±30 % of the initial value (code U : ±35 %)
tan d
< 300 % of the initial limit (code U : ±350 %)
DC leakage current Within the initial limit
Shelf life
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After the life test with DC rated working voltage at +125 °C±2 °C for 3000 hours, ESR value shall
meet the specified below.
ESR after the life test
After 1000 hours
After 2000 hours
20 °C
–40 °C
20 °C
–40 °C
< 150 % of the initial limit
< 200 % of the initial limit
< 300 % of the initial limit
< 400 % of the initial limit
After 3000 hours
20 °C
–40 °C
< 1000 % of the initial limit
< 1500 % of the initial limit
AEC-Q200
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
120
1k
0.65
0.85
10 k
100 k to
0.95
1.00
Marking
Example : 10 V.DC 220 µF
Marking color : BLACK
Negative polarity
marking (–)
220
A TK
Capacitance (µF)
Series identification
Mark for Lead-Free
products
(Black dot)
Lot number
Rated voltage code
R. Voltage
(V.DC)
10
16
25
35
Code
A
C
E
V
Dimensions
0.3 max.
A±0.2
–
+
L
Pressure Relief (010 and larger)
W
( ) Reference size
(Unit : mm)
Size
code
0D
L A, B H
I
W
P
K
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04 Mar. 2016