EEETK1A102AQ Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors

Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type
Series : Medium-size TK Type : V
High temperature
Lead-Free reflow (suffix : A✽)
Features
● _{Endurance : 125 °C 2000 h}
● _{Vibration-proof product is available upon request.}
● _{RoHS compliant}
Specifications
Category temperature range
–40 °C to +125 °C
Rated voltage range
10 V.DC to 100 V.DC
Capacitance range
47 µF to 4700 µF
Capacitance tolerance
±20 % (120 Hz/+20 °C)
Leakage current
I < 0.01 CV After 2 minutes
Dissipation factor (tan d)
Please see the attached characteristics list
Characteristics
at low temperature
V.DC
10 16 25 35 50 63 80 100
Z(–25 °C)/Z(+20 °C) 3 2 2 2 2 2 2 2
Z(–40 °C)/Z(+20 °C) 6 4 4 3 3 3 3 3
(Impedance ratio at 120 Hz)
After applying rated working voltage for 2000 hours at +125 °C±2 °C and then being stabilized
at +20 °C, Capacitors shall meet the following limits.
Endurance
Capacitance change Within ±30 % of the initial value (Miniaturization product : Within ±35 %)
tan d
< 300 % of the initial limit (Miniaturization product : Within 350 %)
DC leakage current Within the initial limit
Shelf life
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Resistance to
Capacitance change Within ±10 % of the initial value
soldering heat
tan d
Within the initial limit
DC leakage current Within the initial limit
AEC-Q200
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
120
1k
0.75
0.90
10 k
100 k to
0.95
1.00
Marking
Example : 10 V.DC 1000 µF
Marking color : BLACK
Negative polarity
marking (–)
1000
A TK
Lot number
Capacitance (µF)
Series identification
Mark for Lead-Free
products
(Black dot)
Rated voltage code
R. Voltage
(V.DC)
10
16
25
35
50
63
80 100
Code A C E V H J K 2A
Dimensions
0.3 max.
A±0.2
–
L
Pressure Relief
+
W
( ) Reference size
(Unit : mm)
Size
code
0D
L A, B H
I
W
P
K
H13 12.5 13.5±0.5 13.5 15.0 max. 4.7 0.90±0.3 4.4 0.70±0.3
J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 1.20±0.3 6.7 0.70±0.3
K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04 Mar. 2016