EEETG1A101P Datasheet, PDF (1/3 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors

Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type
Series : TG Type : V
Features
● _{Endurance : 125 °C 1000 h to 2000 h}
● _{Miniaturization (40 % less than TA Series)}
● _{Low ESR (Low temp)}
● _{Vibration-proof product is available upon request. (08 mm and larger)}
● _{RoHS compliant (Parts No 08 to 010 : EEE✽, 012.5 to 018 : EEV✽)}
Specifications
Category temperature range
–40 °C to +125 °C
Rated voltage range
10 V.DC to 100 V.DC
Capacitance range
10 µF to 4700 µF
Capacitance tolerance
±20 % (120 Hz/+20 °C)
Leakage current
I < 0.01 CV After 2 minutes
Dissipation factor (tan d)
Please see the attached characteristics list
Characteristics
at low temperature
V.DC
10
Z(–25 °C)/Z(+20 °C) 3
Z(–40 °C)/Z(+20 °C) 6
16 25
22
44
35 50 63 80 100
2 2 2 2 2 (Impedance ratio at 120 Hz)
33333
After applying rated working voltage for 1000 hours (08×6.2), 2000 hours (08×10.2 <) at +125 °C±2 °C
and then being stabilized at +20 °C, capacitors shall meet the following limits.
Endurance
Capacitance change Within ±30 % of the initial value (code U : ±35 %)
tan d
< 300 % of the initial limit (code U : ±350 %)
DC leakage current Within the initial limit
Shelf life
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Resistance to
Capacitance change Within ±10 % of the initial value
soldering heat
tan d
Within the initial limit
DC leakage current Within the initial limit
AEC-Q200
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
120
1k
0.65
0.85
10 k
100 k to
0.95
1.00
Marking
Example : 10 V.DC 100 µF, 10 V.DC 1000 µF
Marking color : BLACK
Lead-Free products (< 010)
Negative polarity
marking (–)
Lot number
100
A TG
Capacitance (µF)
Series identification
Mark for Lead-Free
products
(Black dot)
Rated Voltage code
Lead-Free products (> 012.5)
Negative polarity
marking (–)
1000
A TG
Capacitance (µF)
Series identification
Lot number
Rated Voltage code
R. Voltage
(V.DC)
10
16
25
35
50
63
80 100
Code A C E V H J K 2A
Dimensions
0.3 max.
A±0.2
–
+
L
Pressure Relief (010 and larger)
W
( ) Reference size
Size
code
0D
L A, B H
I
E 8.0 6.2±0.3 8.3 9.5 max. 3.4
F 8.0 10.2±0.3 8.3 10.0 max. 3.4
G 10.0 10.2±0.3 10.3 12.0 max. 3.5
H13 12.5 13.5±0.5 13.5 15.0 max. 4.7
J16 16.0 16.5±0.5 17.0 19.0 max. 5.5
K16 18.0 16.5±0.5 19.0 21.0 max. 6.7
W
0.65±0.1
0.90±0.2
0.90±0.2
0.90±0.3
1.20±0.3
1.20±0.3
(Unit : mm)
P
K
2.2
0.35
+
-
0.15
0.20
3.1 0.70±0.20
4.6 0.70±0.20
4.4 0.70±0.30
6.7 0.70±0.30
6.7 0.70±0.30
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Mar. 2016