|
EEEHD1H2R2R Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Surface Mount Type | |||
|
Aluminum Electrolytic Capacitors/ HD
Surface Mount Type
Series: HD Type: V
Ë6.3V to 35V : High temperature Lead-Free reï¬ow (sufï¬x:Aâ½)
ɹ50V to 100V : Standard Lead-Free reï¬ow
â Features
â Endurance: 105 °C 5000 h
â Vibration-proof product is available upon request.(Ï8 <)
â RoHS directive compliant
â Speciï¬cations
Category Temp. Range
â40 °C to +105 °C
Rated W.V. Range
6.3 V.DC to 100 V.DC
Nominal Cap. Range
0.47 µF to 1000 µF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
DC Leakage Current
I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
tan δ
Please see the attached High temperature lead-free reï¬ow products list.
Characteristics
at Low Temperature
W.V. (V)
6.3 10 16 25 35 50 63 100
Z(â25 °C)/Z(+20 °C) 3 3 2 2 2 2 2 2 (Impedance ratio at 120 Hz)
Z(â40 °C)/Z(+20 °C) 4 4 3 3 3 3 3 3
After applying rated working voltage for 5000 hours at +105 °C±2 °C and then being stabilized at +20 °C,
capacitors shall meet the following limits.
Endurance
Capacitance change
tan δ
DC leakage current
±30 % of initial measured value
< 300 % of initial speciï¬ed value
< initial speciï¬ed value
Shelf Life
Resistance to
Soldering Heat
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits speciï¬ed in Endurance. (With voltage treatment)
Capacitance change ±20 % of initial measured value
tan δ
< 200 % of initial speciï¬ed value
DC leakage current < initial speciï¬ed value
After reï¬ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change
tan δ
DC leakage current
±10 % of initial measured value
< initial speciï¬ed value
< initial speciï¬ed value
â Marking
Example: 6.3 V 330 µF
Marking color: BLACK
Negative polarity
marking (â)
330
j HD
Lot number
Capacitance (µF)
Series identification
Mark for Lead-Free
Products Black Dot
(Square)
Rated voltage Mark
Rated Voltage Mark
j
6.3 V
H
50 V
A
10 V
J
63 V
C
16 V
2A
100 V
E
25 V
V
35 V
â Dimensions in mm (not to scale)
0.3 max.
A±0.2
â
( )reference size
L±0.3
+
W
(mm)
Size
code
D
L A,B H max. I
W
P
K
B 4.0 5.8 4.3 5.5 1.8 0.65±0.1 1.0 0.35â0.20 to +0.15
C 5.0 5.8 5.3 6.5 2.2 0.65±0.1 1.5 0.35â0.20 to +0.15
D 6.3 5.8 6.6 7.8 2.6 0.65±0.1 1.8 0.35â0.20 to +0.15
D8 6.3 7.7 6.6 7.8 2.6 0.65±0.1 1.8 0.35â0.20 to +0.15
E 8.0 6.2 8.3 9.5 3.4 0.65±0.1 2.2 0.35â0.20 to +0.15
F 8.0 10.2 8.3 10.0 3.4 0.90±0.2 3.1 0.70±0.20
G 10.0 10.2 10.3 12.0 3.5 0.90±0.2 4.6 0.70±0.20
Design and speciï¬cations are each subject to change without notice. Ask factory for the current technical speciï¬cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
â EE49 â
01 Nov. 2008
|
▷ |