EEEHB0J220AR Datasheet, PDF (1/3 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors

Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type
Series : HB Type : V
High temperature
Lead-Free reflow (suffix : A✽)
Features
● _{Endurance : 105 °C 2000 h}
● _{Vibration-proof product is available upon request. (08 mm and larger)}
● _{RoHS compliant}
Specifications
Category temperature range
–40 °C to +105 °C
Rated voltage range
6.3 V.DC to 50 V.DC
Capacitance range
1 µF to 1500 µF
Capacitance tolerance
±20 % (120 Hz/ +20 °C)
Leakage current
I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
Dissipation factor (tan d)
Please see the attached characteristics list
V.DC
6.3 10 16 25 35 50
Characteristics
at low temperature
Standard
Miniaturization
Z(–25 °C)/Z(+20 °C) 4 3 2 2 2 2
Z(–40 °C)/Z(+20 °C) 8 6 4 4 3 3 (Impedance ratio at 120 Hz)
Z(–25 °C)/Z(+20 °C) 4 3 2 2 2 2
product
Z(–40 °C)/Z(+20 °C) 10 8 6 6 4 4
After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized
at +20 °C, capacitors shall meet the following limits.
Endurance
Capacitance change
Within ±20 % of the initial value (16 V.DC or less :
Within ±25 %, Miniaturization product : Within ±35 %)
tan d
< 200 % of the initial limit
DC leakage current Within the initial limit
Shelf life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Resistance to
Capacitance change Within ±10 % of the initial value
soldering heat
tan d
Within the initial limit
DC leakage current Within the initial limit
AEC-Q200
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
50, 60
120
0.70
1.00
1k
10 k to
1.30
1.70
Marking
Example : 6.3 V.DC 22 µF
Marking color : BLACK
Negative polarity
marking (–)
22
j HB
Lot number
Capacitance (µF)
Series identification
Mark for Lead-Free
products
(Black dot)
Rated voltage code
R. Voltage
(V.DC)
6.3
10
16
25
35
50
Code
j
ACEVH
Dimensions
0.3 max.
A±0.2
–
L
+
Pressure Relief (010 and larger)
Size
code
0D
B 4.0
C 5.0
D 6.3
D8 6.3
E 8.0
F 8.0
G 10.0
L
5.8±0.3
5.8±0.3
5.8±0.3
7.7±0.3
6.2±0.3
10.2±0.3
10.2±0.3
A, B H
I
4.3 5.5 max. 1.8
5.3 6.5 max. 2.2
6.6 7.8 max. 2.6
6.6 7.8 max. 2.6
8.3 9.5 max. 3.4
8.3 10.0 max. 3.4
10.3 12.0 max. 3.5
W
( )reference size
(Unit : mm)
W
P
K
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
1.0
0.35
+
-
0.15
0.20
1.5
0.35
+
-
0.15
0.20
1.8
0.35
+
-
0.15
0.20
1.8
0.35
+
-
0.15
0.20
2.2
0.35
+
-
0.15
0.20
3.1 0.70±0.20
4.6 0.70±0.20
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04 Mar. 2016