EEEHB0G470R Datasheet, PDF (1/3 Pages) Panasonic Semiconductor – Surface Mount Type

Aluminum Electrolytic Capacitors/ HB
Surface Mount Type
Series: _HB Type: _V
■ Features
● Endurance: 105 °C 2000 h
● 5.8 mm height (< φ6.3), 5.5 mm height max.
● Vibration-proof product is available upon request.(φ8 <)
● RoHS directive compliant
Long life
HB
Ȇ
HA
5.5 mm
max.
Low
profile
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
–40 °C to +105 °C
4 V.DC to 50 V.DC
0.1 µF to 470 µF
±20 % (120 Hz/+20 °C)
DC Leakage Current
I < 0.01 CV or 3 (µA) After 2 minutes
(Bi-polar I=0.02 CV or 6 (µA) after 2 minutes)
(Whichever is greater)
tan δ
Characteristics
at Low Temperature
W.V. (V)
4
Z(–25 °C)/Z(+20 °C) 7
Z(–40 °C)/Z(+20 °C) 15
Please see the attached standard products list
6.3 10 16 25 35 50
432222
(Impedance ratio at 120 Hz)
864433
After applying rated working voltage for 2000 hours (Bi-polar : 1000 hours for each polarity) at +105 °C±2 °C
and then being stabilized at +20 °C, Capacitors shall meet the following limits.
Endurance
Capacitance change ±20 % of inisial measured value (4 W.V. : ±35 %±6.3 W.V. : ±25 % φ4 to φ6.3), 5.5 mm max. : ±25 %
tan δ
< 200 % of initial specified value
DC leakage current < initial specified value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Resistance to
Soldering Heat
After reflow soldering and then being stabilized at +20°C, capacitors shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan δ
< initial specified value
DC leakage current < initial specified value
■ Marking
Example:4 V 47 µF
Marking color: BLACK
Rated Voltage Mark
Negative polarity
marking (–)
(No marking for
the bi-polar)
47
g HB
Lot number
Rated Voltage Mark
g
4V
j
6.3 V
A
10 V
C
16 V
E
25 V
V
35 V
H
50 V
Capacitance (µF)
Series identification
(HP : Bi-polar)
(BS : 5.5 mm max.)
Mark for Lead-Free
Products
Black Dot (Square)
■ Dimensions in mm (not to scale)
0.3 max.
A±0.2
–
( )reference size
L^{+–00..12}
✽L±0.3
+
W
(mm)
Size code D
L A,B H max. I
W
P
K
B
4.0 5.8 4.3 5.5 1.8 0.65±0.1 1.0 0.35–0.20 to +0.15
C
5.0 5.8 5.3 6.5 2.2 0.65±0.1 1.5 0.35–0.20 to +0.15
D
6.3 5.8 6.6 7.8 2.6 0.65±0.1 1.8 0.35–0.20 to +0.15
E
8.0 6.2 8.3 9.5 3.4 0.65±0.1 2.2 0.35–0.20 to +0.15
F
8.0 10.2 8.3 10.0 3.4 0.90±0.2 3.1 0.70±0.2
G
10.0 10.2 10.3 12.0 3.5 0.90±0.2 4.6 0.70±0.2
Size code D
L A,B H max. I
W
P
K
✽B
4.0 5.4 4.3 5.5 1.8 0.65±0.1 1.0 0.35–0.20 to +0.15
✽C
5.0 5.4 5.3 6.5 2.2 0.65±0.1 1.5 0.35–0.20 to +0.15
✽D
6.3 5.4 6.6 7.8 2.6 0.65±0.1 1.8 0.35–0.20 to +0.15
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EE44 –
01 Nov. 2009