EEEHA0J220R Datasheet, PDF (1/4 Pages) Panasonic Semiconductor – Surface Mount Type

Aluminum Electrolytic Capacitors/ HA
Surface Mount Type
Series: _HA Type: _V
■ Features
● Endurance: 105 °C 1000 h
● Vibration-proof product is available upon request.(φ8 <)
● RoHS directive compliant
Hight-temperature
assuranceize
HA
Ȇ
S
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan δ
Characteristics
at Low Temperature
W.V. (V)
6.3
Z(–25 °C)/Z(+20 °C) 4
Z(–40 °C)/Z(+20 °C) 8
–40 °C to +105 °C
6.3 V.DC to 100 V.DC
0.1 µF to 1500 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
Please see the attached standard products list
10 16 25 35 50 63 100
3222233
(Impedance ratio at 120 Hz)
6443344
After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized at +20 °C,
capacitors shall meet the following limits.
Endurance
Capacitance change
tan δ
DC leakage current
±20 % of initial measured value (6.3 W.V. of miniature : ±30 %)
< 200 % of initial specified value
< initial specified value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Resistance to
Soldering Heat
After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan δ
< initial specified value
DC leakage current < initial specified value
■ Marking
Example:6.3 V 22 µF (Polarized)
Marking color : BLACK
Negative polarity
marking (–)
22
j HA
Lot number
Capacitance (µF)
Series identification
Mark for Lead-Free
Products Black Dot
(Square)
Rated voltage Mark
Rated Voltage Mark
j
6.3 V
A
10 V
C
16 V
E
25 V
V
35 V
H
50 V
J
63 V
2A
100 V
■ Dimensions in mm (not to scale)
0.3 max.
A±0.2
–
( )reference size
L^{+–00..21}
✽L±0.3
+
W
Size
code
B
C
D
D8 ^✽
E^✽
F^✽
G^✽
D
L
4.0 5.4
5.0 5.4
6.3 5.4
6.3 7.7
8.0 6.2
8.0 10.2
10.0 10.2
A,B H max. I
W
P
4.3 5.5
5.3 6.5
6.6 7.8
6.6 7.8
8.3 9.5
8.3 10.0
10.3 12.0
1.8 0.65±0.1 1.0
2.2 0.65±0.1 1.5
2.6 0.65±0.1 1.8
2.6 0.65±0.1 1.8
3.4 0.65±0.1 2.2
3.4 0.90±0.2 3.1
3.5 0.90±0.2 4.6
(mm)
K
0.35–0.20 to +0.15
0.35–0.20 to +0.15
0.35–0.20 to +0.15
0.35–0.20 to +0.15
0.35–0.20 to +0.15
0.70±0.20
0.70±0.20
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EE37 –
01 Nov. 2008