EEEFC0J220R Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Surface Mount Type

Surface Mount Type
Series: _FC Type: _V
■ Features
● Endurance : 105 °C 1000 h
● Low impedance (1/2 for HA series)
● Vibration-proof product is available upon request. (φ8 <)
● RoHS directive compliant
Aluminum Electrolytic Capacitors/ FC
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan δ
Characteristics
at Low Temperature
W.V. (V)
Z(–25 °C) / Z(+20 °C)
Z(–40 °C) / Z(+20 °C)
–40 °C to +105 °C
6.3 V.DC to 50 V.DC
1 µF to 1500 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
Please see the attached standard products list
6.3 10 16 25 35 50
2
2
2
2
2
2
(Impedance ratio at 120 Hz)
3
3
3
3
3
3
After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized
at +20 °C, Capacitors shall meet the following limits.
Endurance
Capacitance change
tan δ
DC leakage current
±20 % of initial measured value
< 200 % of initial specified value
< initial specified value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment)
Resistance to
Soldering Heat
After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan δ
< initial specified value
DC leakage current < initial specified value
■ Marking
Example:6.3 V 22 µF
Marking color : BLACK
Negative polarity
marking (–)
22
j FC
Capacitance (µF)
Series identification
Mark for Lead-Free
Products Black Dot
(Square)
Rated Voltage Mark
■ Dimensions in mm (not to scale)
0.3 max.
( )reference size
A±0.2
–
L^{+–00..21}
✽L±0.3
+
W
Lot number
Rated Voltage Mark
j
6.3 V
A
10 V
C
16 V
E
25 V
V
35 V
H
50 V
Size
code
B
C
D
E^✽
F^✽
G^✽
D L A,B H max. I
4.0 5.4 4.3 5.5 1.8
5.0 5.4 5.3 6.5 2.2
6.3 5.4 6.6 7.8 2.6
8.0 6.2 8.3 9.5 3.4
8.0 10.2 8.3 10.0 3.4
10.0 10.2 10.3 12.0 3.5
W
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
(mm)
P
K
1.0 0.35–0.20 to +0.15
1.5 0.35–0.20 to +0.15
1.8 0.35–0.20 to +0.15
2.2 0.35–0.20 to +0.15
3.1 0.70±0.2
4.6 0.70±0.2
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Apr. 2008