EEE-TPV470XAP Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/TP

Aluminum Electrolytic Capacitors/TP
Surface Mount Type
Series: _TP Type: _V
TP High temperature Lead-Free reflow(suffix:A✽)
■ Features
● Lower ESR at Low temperature after endurance
● Endurance: 3000 h at 125 °C(D8 size : 2000 h)
● Automotive
● Vibration-proof product is available upon request. (08 mm and larger)
● AEC-Q200 qualified^✽
● RoHS directive compliant
■ Specifications
Category Temp. Range
–40 °C to +125 °C
Rated W.V.Range
10 V.DC to 35 V.DC
Nominal Cap.Range
47 μF to 470 μF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
DC Leakage Current
tan d
I < 0.01 CV (μA) After 2 minutes
Please see the attached standard products list
After the life test with DC rated working voltage at +125 °C±2 °C for 3000 hours(D8 size : 2000 h).
the capacitors shall meet the limits specified below.
Capacitance change ±30 % of initial measured value
Endurance
tan d
DC leakage current
ESR after
Endurance
(Ω/100kHz)
< 300 % of initial specified value
< initial specified value
Size Code
D8
F
G
Initial(+20 °C)
0.45
0.2
0.15
After 2000 h(-40 °C)
40
4.5
3.5
Shelf Life
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment)
Resistance to
Soldering Heat
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan d
< initial specified value
DC leakage current
< initial specified value
■ Frequency correction factor for ripple current
Correction factor
120
0.65
Frequency (Hz)
1k
10 k
0.85
0.95
100 k to
1.00
■ Marking
Example:10 V 220 μF Marking color : BLACK
■ Dimensions in mm (not to scale)
(Unit : mm)
Negative polarity
marking (–)

" 51
Lot number
Capacitance (μF)
Series identification
Mark for Lead-Free
Products Black Dot
(Square)
Rated voltage Mark
Rated Voltage Mark
A
10 V
C
16 V
E
25 V
V
35 V
0.3 max.
A±0.2
–
+
L
Pressure Relief (010 and larger)
W
( ) Reference size
Size
code
D
L A, B H
I
WP
K
D8
6.3
7.7±0.3
6.6
7.8 max.
2.6
0.65±0.1
1.8
0.35
+
-
0.15
0.20
F 8.0 10.2±0.3 8.3 10.0max. 3.4 0.90±0.2 3.1 0.70±0.20
G 10.0 10.2±0.3 10.3 12.0max. 3.5 0.90±0.2 4.6 0.70±0.20
✽ This product qualify for AEC-Q200, but it has some deviations.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Mar. 2014
– EEE-57 –