EEE-TK1K331AM Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ TK

Surface Mount Type
Series: _{Medium-size TK} Type: _V
TK ^{High temperature Lead-Free reflow(suffix:A}✽⁾
Aluminum Electrolytic Capacitors/ TK
■ Features
● Endurance: 2000 h at 125 °C
● Vibration-proof product is available upon request.
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V. Range
–40 °C to +125 °C
10 V.DC to 100 V.DC
Nominal Cap. Range
47 µF to 4700 µF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
DC Leakage Current
tan δ
Characteristics at Low
Temperature
I < 0.01 CV After 2 minutes
Please see the attached High temperature lead-free reflow products list.
W.V. (V)
10 16 25 35 50 63 80 100
Z(–25 °C)/Z(+20 °C) 3 2 2 2 2 2 2 2
(Impedance ratio at 120 Hz)
Z(–40 °C)/Z(+20 °C) 6 4 4 3 3 3 3 3
After applying rated working voltage for 2000 hours at +125 °C±2 °C and then being stabilized at +20 °C,
Capacitors shall meet the following limits.
Endurance
Capacitance change
tan δ
DC leakage current
±30 % of initial measured value (Miniaturization product : Within ±35 %)
< 300 % of initial specified value (Miniaturization product : Within 350 %)
< initial specified value
Shelf Life
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specified in Endurance.(With voltage treatment)
Resistance to
Soldering Heat
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan δ
< initial specified value
DC leakage current < initial specified value
■ Frequency correction factor for ripple current
120
Correction factor
0.75
Frequency (Hz)
1k
10 k
0.90
0.95
100 k to
1.00
■ Marking
Example:10 V 1000 µF
Marking color: BLACK
Negative
polarity
marking (–)
1000
A TK
Lot number
Rated Voltage Mark
A
10 V
C
16 V
E
25 V
V
35 V
H
50 V
J
63 V
K
80 V
2A
100 V
Capacitance (µF)
Series
Mark for Lead-Free
Products
Black Dot (Square)
Rated Voltage Mark
■ Dimensions in mm (not to scale)
0.3 max.
A±0.2
–
+
L
Pressure Relief (φ10 and larger)
W
( ) Reference size
(mm)
Size
code
D
L
A, B
H
I
W
P
K
H13 12.5 13.5±0.5 13.5 15.0 max. 4.7 0.90±0.3 4.4 0.70±0.3
J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 1.20±0.3 6.7 0.70±0.3
K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EE73 –
02 Sep. 2011