EEE-TK1E221UP Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ TK

Aluminum Electrolytic Capacitors/ TK
Surface Mount Type
Series: _TK Type: _V
■ Features
● Endurance : 125 °C 3000 h
● Low ESR at –40 °C (50 % lower than TG series)
● Added ESR specification after the endurance test
● Vibration-proof product is available upon request.
● AEC-Q200 qualified^✽
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan d
Characteristics
at Low Temperature
Endurance
Shelf Life
ESR after the Life test
–40 °C to +125 °C
10 V.DC to 35 V.DC
47 μF to 470 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV After 2 minutes
Please see the attached standard products list
W.V. (V)
10
16
25
35
Z(–25 °C)/Z(+20 °C)
3
2
2
2
(Impedance ratio at 120 Hz)
Z(–40 °C)/Z(+20 °C)
4
3
3
3
After the life test with DC rated woking voltage at +125 °C ±2 °C for 3000 hours, the capacitors shall meet the
limits specified below.
Capacitance change ±30 % of initially measured values (code U : ±35 %)
tan d
< 300 % of initially specified values (code U : ±350 %)
DC leakage current < initially specified values
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After the life test with DC rated working voltage at +125 °C±2 °C for 3000 hours, ESR value shall
meet the specified below.
After 1000 hours
20 °C
–40 °C
< 150 % of the initially measured specified value.
< 200 % of the initially measured specified value.
After 2000 hours
20 °C
–40 °C
< 300 % of the initially measured specified value.
< 400 % of the initially measured specified value.
After 3000 hours
20 °C
–40 °C
< 1000 % of the initially measured specified value.
< 1500 % of the initially measured specified value.
■ Frequency correction factor for ripple current
Correction factor
120
0.65
Frequency (Hz)
1k
10 k
0.85
0.95
100 k to
1.00
■ Marking
Example:10 V 220 μF (polarized)
Marking color: BLACK
Negative polarity
marking (–)

" 5,
Lot number
Capacitance (μF)
Series identification
Mark for Lead-Free
Products Black Dot
(Square)
Rated voltage Mark
Rated Voltage Mark
A
10 V
C
16 V
E
25 V
V
35 V
■ Dimensions in mm (not to scale)
0.3 max.
A±0.2
–
(Unit : mm)
+
L
Pressure Relief (010 and larger)
W
( ) Reference size
Size
code
D
L
A, B
H
I
W
P
K
F
8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2
✽ This product qualify for AEC-Q200, but it has some deviations.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2014
– EEE-55 –