EEE-HA1V101XP Datasheet, PDF (1/4 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ HA

Aluminum Electrolytic Capacitors/ HA
Surface Mount Type
Series: _HA Type: _V
■ Features
● Endurance: 105 °C 1000 h
● Vibration-proof product is available upon request.
(08 mm and larger)
● AEC-Q200 qualified^✽
● RoHS directive compliant
Hight-temperature
assuranceize
HA
↑
S
■ Specifications
Category Temp. Range
–40 °C to +105 °C
Rated W.V. Range
6.3 V.DC to 100 V.DC
Nominal Cap. Range
1 μF to 1500 μF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
DC Leakage Current
I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
tan d
Please see the attached standard products list
Characteristics
at Low Temperature
W.V. (V)
6.3 10 16 25 35 50 63 100
Z(–25 °C)/Z(+20 °C) 4 3 2 2 2 2 3 3
Z(–40 °C)/Z(+20 °C) 8 6 4 4 3 3 4 4
(Impedance ratio at 120 Hz)
After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized at +20 °C,
capacitors shall meet the following limits.
Endurance
Capacitance change ±20 % of initial measured value (6.3 W.V. of miniature : ±30 %)
tan d
< 200 % of initial specified value
DC leakage current < initial specified value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits.
Resistance to
Soldering Heat
Capacitance change ±10 % of initial measured value
tan d
< initial specified value
DC leakage current < initial specified value
■ Frequency correction factor for ripple current
Correction factor
50, 60
0.70
Frequency (Hz)
120
1k
1.00
1.30
10 k to
1.70
■ Marking
Example:6.3 V 22 μF (Polarized)
Marking color : BLACK
■ Dimensions in mm (not to scale)
0.3 max.
A±0.2
–
(Unit : mm)
Negative polarity
marking (–)

K )"
Lot number
Capacitance (μF)
Series identification
Mark for Lead-Free
Products Black Dot
(Square)
Rated voltage Mark
Rated Voltage Mark
j
6.3 V
A
10 V
C
16 V
E
25 V
V
35 V
H
50 V
J
63 V
2A
100 V
L
+
Pressure Relief (010 and larger)
W
( ) Reference size
Size
code
D
B 4.0
C 5.0
D 6.3
D8 6.3
E 8.0
L
5.4
+
-
0.1
0.2
5.4
+
-
0.1
0.2
5.4
+
-
0.1
0.2
7.7±0.3
6.2±0.3
A, B
4.3
5.3
6.6
6.6
8.3
H
I
5.5 max. 1.8
6.5 max. 2.2
7.8 max. 2.6
7.8 max. 2.6
9.5 max. 3.4
W
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
P
K
1.0
0.35
+
-
0.15
0.20
1.5
0.35
+
-
0.15
0.20
1.8
0.35
+
-
0.15
0.20
1.8
0.35
+
-
0.15
0.20
2.2
0.35
+
-
0.15
0.20
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.20
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.20
✽ This product qualify for AEC-Q200, but it has some deviations.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Mar. 2014
– EEE-17 –