EEE-FTV151XAP Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ FT

Surface Mount Type
Series: _FT Type: _V
High temperature Lead-Free reflow(suffix:A✽)
■ Features
● Endurance: 2000 h at 105 °C
● Miniaturized, Low ESR (1 size smaller than series FK)
● Vibration-proof product is available upon request. (φ8 <)
● RoHS directive compliant
Aluminum Electrolytic Capacitors/ FT
■ Specifications
Category Temp. Range
–55 °C to +105 °C
Rated W.V.Range
25 V.DC to 50 V.DC
Nominal Cap.Range
22 µF to 820 µF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
DC Leakage Current
I < 0.01 CV After 2 minutes
tan δ
Please see the attached High temperature lead-free reflow products list.
After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C,
Capacitors shall meet the following limits.
Endurance
Capacitance change ±30 % of initial measured value
tan δ
< 200 % of initial specified value
DC leakage current < initial specified value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits.
Resistance to
Soldering Heat
Capacitance change ±10 % of initial measured value
tan δ
< initial specified value
DC leakage current < initial specified value
■ Marking
Example:25 V 22 µF
Marking color : BLACK
Negative polarity
marking (–)
22
E FT
Lot number
Capacitance (µF)
Series identification
Mark for Lead-Free
Products Black Dot
(Square)
Rated Voltage Mark
Rated Voltage Mark
E
25 V
V
35 V
H
50 V
■ Dimensions in mm (not to scale)
0.3 max.
A±0.2
–
( )reference size
+
W
L
Size
code
D
L
A, B
B 4.0 5.8±0.3 4.3
C 5.0 5.8±0.3 5.3
D 6.3 5.8±0.3 6.6
D8 6.3 7.7±0.3 6.6
F 8.0 10.2±0.3 8.3
G 10.0 10.2±0.3 10.3
H
I
5.5 max. 1.8
6.5 max. 2.2
7.8 max. 2.6
7.8 max. 2.6
10.0 max. 3.4
12.0 max. 3.5
W
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
(mm)
P
K
1.0
0.35
+
-
0.15
0.20
1.5
0.35
+
-
0.15
0.20
1.8
0.35
+
-
0.15
0.20
1.8
0.35
+
-
0.15
0.20
3.1 0.70±0.20
4.6 0.70±0.20
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 Feb. 2011