EEE-FP1V151AP Datasheet, PDF (1/3 Pages) Panasonic Semiconductor – Low ESR (30 to 50 less than FK series)

Aluminum Electrolytic Capacitors/ FP
Surface Mount Type
Series: _FP Type: _V
FP High temperature Lead-Free reflow (suffix:A✽)
■ Features
● Low ESR (30 % to 50 % less than FK series)
● Endurance: 2000 h at 105 °C
● Vibration-proof product is available upon request. (φ8 <)
● RoHS directive compliant
■ Specifications
Category Temp. Range
–55 °C to +105 °C
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
6.3 V.DC to 50 V.DC
10 µF to 1800 µF
±20 % (120 Hz/+20 °C)
DC Leakage Current
tan δ
Characteristics
at Low Temperature
W.V. (V)
Z(–25 °C)/Z(+20 °C)
Z(–40°C)/Z(+20 °C)
Z(–55°C)/Z(+20 °C)
I < 0.01 CV or 3 (µA) After 2 minutes (whichever is greater)
Please see the attached standard products list
6.3 10 16 25 35 50
222222
333333
(Impedance ratio at 120 Hz)
444333
After applying rated working voltage at +105 °C ±2 °C for 2000 hours the capacitors shall meet the
limits specified below. Post-test requirement at +20 °C
Endurance
Capacitance change
tan δ
DC leakege current
±30 % of initial measured value
< 200 % of initial specified value
< initial specified value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Resistance to
Soldering Heat
Capacitance change
tan δ
DC leakage current
±10 % of initial measured value
< initial specified value
< initial specified value
■ Marking
Example:6.3 V 22 µF
Marking color: BLACK
Negative polarity
marking (–)
22
j FP
Capacitance (µF)
Series identification
Mark for Lead-Free
Products Black Dot
(Square)
Rated voltage Mark
Lot number
Rated Voltage Mark
j
6.3 V
A
10 V
C
16 V
E
25 V
V
35 V
H
50 V
■ Dimensions in mm(not to scale)
0.3 max.
A±0.2
–
( )reference size
L±0.3
+
W
Size
code
D
L A,B H max. I
W
P
(mm)
K
B 4.0 5.8 4.3 5.5 1.8 0.65±0.1 1.0 0.35–0.20 to +0.15
C 5.0 5.8 5.3 6.5 2.2 0.65±0.1 1.5 0.35–0.20 to +0.15
D 6.3 5.8 6.6 7.8 2.6 0.65±0.1 1.8 0.35–0.20 to +0.15
D8 6.3 7.7 6.6 7.8 2.6 0.65±0.1 1.8 0.35–0.20 to +0.15
E 8.0 6.2 8.3 9.5 3.4 0.65±0.1 2.2 0.35–0.20 to +0.15
F
8.0 10.2 8.3 10.0 3.4 0.90±0.2 3.1
0.70±0.20
G 10.0 10.2 10.3 12.0 3.5 0.90±0.2 4.6
0.70±0.20
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EE63 –
01 Feb. 2009