EEE-FP0J331AP Datasheet, PDF (1/3 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ FP

Aluminum Electrolytic Capacitors/ FP
Surface Mount Type
Series: _FP Type: _V
FP High temperature Lead-Free reflow (suffix:A✽)
■ Features
● Low ESR (30 % to 50 % less than FK series)
● Endurance: 2000 h at 105 °C
● Vibration-proof product is available upon request. (08 mm and larger)
● AEC-Q200 qualified^✽
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V. Range
–55 °C to +105 °C
6.3 V.DC to 50 V.DC
Nominal Cap. Range
10 μF to 1800 μF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
DC Leakage Current
tan d
W.V. (V)
I < 0.01 CV or 3 (μA) After 2 minutes (whichever is greater)
Please see the attached standard products list
6.3 10 16 25 35 50
Characteristics
at Low Temperature
Z(–25 °C)/Z(+20 °C) 2 2 2 2 2 2
Z(–40°C)/Z(+20 °C) 3 3 3 3 3 3
(Impedance ratio at 120 Hz)
Z(–55°C)/Z(+20 °C) 4 4 4 3 3 3
After applying rated working voltage at +105 °C ±2 °C for 2000 hours the capacitors shall meet the
limits specified below. Post-test requirement at +20 °C
Endurance
Capacitance change
tan d
DC leakege current
±30 % of initial measured value
< 200 % of initial specified value
< initial specified value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Resistance to
Soldering Heat
Capacitance change
tan d
DC leakage current
±10 % of initial measured value
< initial specified value
< initial specified value
■ Frequency correction factor for ripple current
Cap (μF)
10 to
470
560 to 1800
120
0.65
0.75
Frequency (Hz)
1k
10 k
0.85
0.95
0.90
0.95
100 k to
1.00
1.00
■ Marking
Example:6.3 V 22 μF
Marking color: BLACK
■ Dimensions in mm(not to scale)
0.3 max.
A±0.2
–
(Unit : mm)
Negative polarity
marking (–)

K '1
Lot number
Capacitance (μF)
Series identification
Mark for Lead-Free
Products Black Dot
(Square)
Rated voltage Mark
Rated Voltage Mark
j
6.3 V
A
10 V
C
16 V
E
25 V
V
35 V
H
50 V
L
+
Pressure Relief (010 and larger)
W
( ) Reference size
Size
code
D
L
A, B
H
I
B 4.0 5.8±0.30 4.3 5.5 max. 1.8
C 5.0 5.8±0.30 5.3 6.5 max. 2.2
D 6.3 5.8±0.30 6.6 7.8 max. 2.6
D8 6.3 7.7±0.30 6.6 7.8 max. 2.6
E 8.0 6.2±0.30 8.3 9.5 max. 3.4
F 8.0 10.2±0.30 8.3 10.0 max. 3.4
G 10.0 10.2±0.30 10.3 12.0 max. 3.5
W
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
P
K
1.0
0.35
+
-
0.15
0.20
1.5
0.35
+
-
0.15
0.20
1.8
0.35
+
-
0.15
0.20
1.8
0.35
+
-
0.15
0.20
2.2
0.35
+
-
0.15
0.20
3.1 0.70±0.20
4.6 0.70±0.20
✽ This product qualify for AEC-Q200, but it has some deviations.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Mar. 2014
– EEE-47 –