EEE-FK2A330P Datasheet, PDF (1/4 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ FK

Surface Mount Type
Series: _FK Type: _V
■ Features
● Endurance: 2000 h to 5000 h at 105 °C
● Low impedance (40 % to 60 % less than FC series)
Miniaturized (30 % to 50 % less than FC series)
● Vibration-proof product is available upon request. (φ8 <)
● RoHS directive compliant
Aluminum Electrolytic Capacitors/ FK
■ Specifications
Category Temp. Range
Rated W.V.Range
Nominal Cap.Range
Capacitance Tolerance
DC Leakage Current
tan δ
W.V. (V)
Characteristics
at Low Temperature
Z(–25 °C)/Z(+20 °C)
Z(–40 °C)/Z(+20 °C)
Z(–55 °C)/Z(+20 °C)
–55 °C to +105 °C
6.3 V.DC to 100 V.DC
3.3 µF to 6800 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
Please see the attached standard products list
6.3 10 16 25 35 50 63 80 100
222222222
(Impedance ratio at 120 Hz)
333333333
444333333
Endurance
After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C,
Capacitors shall meet the following limits. ( > φ12.5 and suffix “G” in φ8҂10.2, φ10҂10.2 are 5000 hours)
Capacitance change
±30 % of initial measured value (Suffix “G” is 35 %)
tan δ
< 200 % of initial specified value (Suffix “G” is 300 %)
DC leakage current
< initial specified value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment)
Resistance to
Soldering Heat
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change
±10 % of initial measured value
tan δ
< initial specified value
DC leakage current
< initial specified value
■ Marking
Example:6.3 V 22 µF, 6.3 V 3300 µF
Marking color : BLACK
< φ10
Rated Voltage Mark
Negative polarity
marking (–)
22
j FK
Lot number
Capacitance (µF)
Series identification
Mark for Lead-Free
ProductsBlack Dot
(Square)
> φ12.5
Rated Voltage Mark
Negative polarity
marking (–)
3300
j FK
Capacitance (µF)
Series identification
Rated Voltage Mark
j
6.3 V
A
10 V
C
16 V
E
25 V
V
35 V
Lot number
H
J
K
2A
50 V
63 V
80 V
100 V
■ Dimensions in mm (not to scale)
0.3 max.
A±0.2
–
( )reference size
+
W
L
(mm)
Size
code
D
B 4.0
C 5.0
D 6.3
D8 6.3
E 8.0
L
A,B
5.8±0.3 4.3
5.8±0.3 5.3
5.8±0.3 6.6
7.7±0.3 6.6
6.2±0.3 8.3
H
I
W
P
K
5.5 max. 1.8
0.65±0.1
1.0
0.35
+
-
1.5
0.2
6.5 max. 2.2
0.65±0.1
1.5
0.35
+
-
1.5
0.2
7.8 max. 2.6
0.65±0.1
1.8
0.35
+
-
1.5
0.2
7.8 max. 2.6
0.65±0.1
1.8
0.35
+
-
1.5
0.2
9.5 max. 3.4
0.65±0.1
2.2
0.35
+
-
1.5
0.2
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2
H13 12.5 13.5±0.5 13.5 15.0 max. 4.7 0.90±0.3 4.4 0.70±0.3
J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 1.20±0.3 6.7 0.70±0.3
K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EE63 –
00 Sep. 2010