EEE-FK1V101AP Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ FK

Surface Mount Type
Series: _FK Type: _V
FK High temperature Lead-Free reflow(suffix:A✽)
Aluminum Electrolytic Capacitors/ FK
■ Features
● Endurance: 2000 h at 105 °C
● Low impedance (40 % to 60 % less than FC series)
Miniaturized (30 % to 50 % less than FC series)
● Vibration-proof product is available upon request. (08 mm and larger)
● AEC-Q200 qualified^✽
● RoHS directive compliant
■ Specifications
Category Temp. Range
–55 °C to +105 °C
Rated W.V.Range
Nominal Cap.Range
6.3 V.DC to 35 V.DC
4.7 μF to 1500 μF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
DC Leakage Current
tan d
I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
Please see the attached High temperature lead-free reflow products list.
W.V. (V)
6.3 10 16 25 35
Characteristics
at Low Temperature
Z(–25 °C)/Z(+20 °C) 2
2
2
2
2
Z(–40 °C)/Z(+20 °C) 3
3
3
3
3
(Impedance ratio at 120 Hz)
Z(–55 °C)/Z(+20 °C) 4
4
4
3
3
Endurance
Shelf Life
After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C,
Capacitors shall meet the following limits.
Capacitance change ±30 % of initial measured value
tan d
< 200 % of initial specified value
DC leakage current < initial specified value
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits.
Resistance to
Soldering Heat
Capacitance change
tan d
DC leakage current
±10 % of initial measured value
< initial specified value
< initial specified value
■ Frequency correction factor for ripple current
Cap (μF)
4.7 to
680 to
470
1500
120
0.65
0.70
Frequency (Hz)
1k
10 k
0.85
0.95
0.90
0.95
100 k to
1.00
1.00
■ Marking
Example:6.3 V 22 μF
Marking color : BLACK
Negative polarity
marking (–)

K ',
Lot number
Capacitance (μF)
Series identification
Mark for Lead-Free
Products Black Dot
(Square)
Rated voltage Mark
Rated Voltage Mark
j
6.3 V
A
10 V
C
16 V
E
25 V
V
35 V
■ Dimensions in mm (not to scale)
0.3 max.
A±0.2
–
(Unit : mm)
+
L
Pressure Relief (010 and larger)
W
( ) Reference size
Size
code
D
L
A, B
B 4.0 5.8±0.3 4.3
C 5.0 5.8±0.3 5.3
D 6.3 5.8±0.3 6.6
D8 6.3 7.7±0.3 6.6
E 8.0 6.2±0.3 8.3
F 8.0 10.2±0.3 8.3
G 10.0 10.2±0.3 10.3
H
I
5.5 max. 1.8
6.5 max. 2.2
7.8 max. 2.6
7.8 max. 2.6
9.5 max. 3.4
10.0 max. 3.4
12.0 max. 3.5
W
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
P
K
1.0
0.35
+
-
0.15
0.20
1.5
0.35
+
-
0.15
0.20
1.8
0.35
+
-
0.15
0.20
1.8
0.35
+
-
0.15
0.20
2.2
0.35
+
-
0.15
0.20
3.1 0.70±0.20
4.6 0.70±0.20
✽ This product qualify for AEC-Q200, but it has some deviations.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Mar. 2014
– EEE-37 –