EEE-FK1H221P Datasheet, PDF (1/5 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/Medium-size FK

Aluminum Electrolytic Capacitors/Medium-size FK
Surface Mount Type
Series: _{Medium-size FK} Type: _V
FK ^{High temperature Lead-Free reflow(suffix:A}✽⁾
■ Features
● Endurance: 5000 h at 105 °C
● Vibration-proof product is available upon request.
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V.Range
–55 °C to +105 °C
6.3 V.DC to 100 V.DC
Nominal Cap.Range
Capacitance Tolerance
DC Leakage Current
tan δ
W.V. (V)
Characteristics
at Low Temperature
Z(–25 °C)/Z(+20 °C)
Z(–40 °C)/Z(+20 °C)
Z(–55 °C)/Z(+20 °C)
47 µF to 6800 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV (µA) After 2 minutes
Please see the attached High temperature lead-free reflow products list.
6.3 10 16 25 35 50 63 80 100
2
2
2
2
2
2
2
2
2
(Impedance ratio at 120 Hz)
3
3
3
3
3
3
3
3
3
4
4
4
3
3
3
3
3
3
After applying rated working voltage for 5000 hours at +105 °C±2 °C and then being stabilized at +20 °C,
Capacitors shall meet the following limits.
Endurance
Capacitance change
tan δ
DC leakage current
±30 % of initial measured value
< 200 % of initial specified value
< initial specified value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment)
Resistance to
Soldering Heat
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan δ
< initial specified value
DC leakage current < initial specified value
■ Marking
Example:6.3 V 3300 µF Marking color : BLACK
■ Dimensions in mm (not to scale)
Negative
polarity
marking (–)
3300
j FK
Capacitance (µF)
Series identification
Mark for Lead-Free
Products
Black Dot (Square)
Rated Voltage Mark
0.3 max.
A±0.2
–
( )reference size
L±0.5
+
W
Lot number
Rated Voltage Mark
j
A
C
E
V
H
J
K
2A
6.3 V
10 V
16 V
25 V
35 V
50 V
63 V
80 V
100 V
Size
code
D
L A,B H max. I
W
P
H13 12.5 13.5 13.5 15.0 4.7 0.90±0.3 4.4
J16 16.0 16.5 17.0 19.0 5.5 1.20±0.3 6.7
K16 18.0 16.5 19.0 21.0 6.7 1.20±0.3 6.7
(mm)
K
0.70±0.3
0.70±0.3
0.70±0.3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Jul. 2008