EEE-FK1C152AQ Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/Medium-size FK

Aluminum Electrolytic Capacitors/Medium-size FK
Surface Mount Type
Series: _{Medium-size FK} Type: _V
FK ^{High temperature Lead-Free reflow(suffix:A}✽⁾
■ Features
● Endurance: 5000 h at 105 °C
● Vibration-proof product is available upon request.
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V.Range
Nominal Cap.Range
Capacitance Tolerance
–55 °C to +105 °C
6.3 V.DC to 100 V.DC
47 µF to 6800 µF
±20 % (120 Hz/+20 °C)
DC Leakage Current
tan δ
W.V. (V)
I < 0.01 CV (µA) After 2 minutes
Please see the attached High temperature lead-free reflow products list.
6.3 10 16 25 35 50 63 80 100
Characteristics
at Low Temperature
Z(–25 °C)/Z(+20 °C) 2
Z(–40 °C)/Z(+20 °C) 3
2
3
2
3
2
3
2
3
2
3
2
3
2
3
2
(Impedance ratio at 120 Hz)
3
Z(–55 °C)/Z(+20 °C) 4
4
4
3
3
3
3
3
3
After applying rated working voltage for 5000 hours at +105 °C±2 °C and then being stabilized at +20 °C,
Capacitors shall meet the following limits.
Endurance
Capacitance change ±30 % of initial measured value
tan δ
DC leakage current
< 200 % of initial specified value
< initial specified value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Resistance to
Soldering Heat
Capacitance change
tan δ
DC leakage current
±10 % of initial measured value
< initial specified value
< initial specified value
■ Frequency correction factor for ripple current
Cap (µF)
120
47
to 6800
0.75
Frequency (Hz)
1k
10 k
0.90
0.95
100 k to
1.00
■ Marking
Example:6.3 V 3300 µF Marking color : BLACK
■ Dimensions in mm (not to scale)
(Unit : mm)
Negative polarity
marking (–)
3300
j FK
Lot number
Capacitance (µF)
Series identification
Mark for Lead-Free
Products Black Dot
(Square)
Rated voltage Mark
Rated Voltage Mark
j
6.3 V
A
10 V
C
16 V
E
25 V
V
35 V
H
50 V
J
63 V
K
80 V
2A
100 V
0.3 max.
A±0.2
–
+
L
Pressure Relief (φ10 and larger)
W
( ) Reference size
Size
code
H13
J16
K16
D
L
12.5 13.5±0.5
16.0 16.5±0.5
18.0 16.5±0.5
A, B
H
I
W
P
K
13.5 15.0 max. 4.7 0.90±0.3 4.4 0.70±0.30
17.0 19.0 max. 5.5 1.20±0.3 6.7 0.70±0.30
19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.30
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EEE-39 –
00 Nov. 2012