EEE-FC1E331AP Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ FC

Aluminum Electrolytic Capacitors/ FC
Surface Mount Type
Series: _FC Type: _V
FC ^{High temperature Lead-Free reflow(suffix:A}✽⁾
Low impedance
FC
Ȇ
HA
■ Features
● Endurance : 105 °C 1000 h
● Low impedance (1/2 for HA series)
● Vibration-proof product is available upon request. (φ8 mm and larger)
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan δ
Characteristics
at Low Temperature
–40 °C to +105 °C
6.3 V.DC to 35 V.DC
1 µF to 1500 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
Please see the attached High temperature lead-free reflow products list.
W.V. (V)
6.3
10
16
25
35
Z(–25 °C) / Z(+20 °C) 2
2
2
2
2
(Impedance ratio at 120 Hz)
Z(–40 °C) / Z(+20 °C) 3
3
3
3
3
Endurance
After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized
at +20 °C, Capacitors shall meet the following limits.
Capacitance change
tan δ
DC leakage current
±20 % of initial measured value
< 200 % of initial specified value
< initial specified value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment)
Resistance to
Soldering Heat
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan δ
< initial specified value
DC leakage current < initial specified value
■ Frequency correction factor for ripple current
Correction factor
50, 60
0.70
Frequency (Hz)
120
1k
10 k
0.75
0.90
0.95
100 k to
1.00
■ Marking
Example:6.3 V 22 µF
Marking color : BLACK
Negative polarity
marking (–)
22
j FC
Lot number
Capacitance (µF)
Series identification
Mark for Lead-Free
Products Black Dot
(Square)
Rated voltage Mark
Rated Voltage Mark
j
6.3 V
A
10 V
C
16 V
E
25 V
V
35 V
■ Dimensions in mm (not to scale)
(Unit : mm)
0.3 max.
A±0.2
–
+
L
Pressure Relief (φ10 and larger)
W
( ) Reference size
Size
code
D
L
A, B
H
I
W
P
K
B
4.0
5.4
+0.1
-0.2
4.3
5.5 max. 1.8
0.65±0.1
1.0
0.35
+0.15
-0.20
C
5.0
5.4
+0.1
-0.2
5.3
6.5 max. 2.2
0.65±0.1
1.5
0.35
+0.15
-0.20
D
6.3
5.4
+0.1
-0.2
6.6
7.8 max. 2.6
0.65±0.1
1.8
0.35
+0.15
-0.20
E
8.0
6.2±0.3
8.3
9.5 max. 3.4
0.65±0.1
2.2
0.35
+0.15
-0.20
F
8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EEE-33 –
00 Nov. 2012