EEE-FC1C470P Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ FC

Aluminum Electrolytic Capacitors/ FC
Surface Mount Type
Series: _FC Type: _V
Low impedance
FC
↑
HA
■ Features
● Endurance : 105 °C 1000 h
● Low impedance (1/2 for HA series)
● Vibration-proof product is available upon request. (08 mm and larger)
● AEC-Q200 qualified^✽
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan d
Characteristics
at Low Temperature
Endurance
Shelf Life
Resistance to
Soldering Heat
W.V. (V)
Z(–25 °C) / Z(+20 °C)
Z(–40 °C) / Z(+20 °C)
–40 °C to +105 °C
6.3 V.DC to 50 V.DC
1 μF to 1500 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
Please see the attached standard products list
6.3 10 16 25 35 50
2
2
2
2
2
2
(Impedance ratio at 120 Hz)
3
3
3
3
3
3
After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized
at +20 °C, Capacitors shall meet the following limits.
Capacitance change
tan d
DC leakage current
±20 % of initial measured value
< 200 % of initial specified value
< initial specified value
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan d
< initial specified value
DC leakage current < initial specified value
■ Frequency correction factor for ripple current
Correction factor
50, 60
0.70
Frequency (Hz)
120
1k
10 k
0.75
0.90
0.95
100 k to
1.00
■ Marking
Example:6.3 V 22 μF
Marking color : BLACK
Negative polarity
marking (–)

K '$
Lot number
Capacitance (μF)
Series identification
Mark for Lead-Free
Products Black Dot
(Square)
Rated voltage Mark
Rated Voltage Mark
j
6.3 V
A
10 V
C
16 V
E
25 V
V
35 V
H
50 V
■ Dimensions in mm (not to scale)
0.3 max.
A±0.2
–
(Unit : mm)
+
L
Pressure Relief (010 and larger)
W
( ) Reference size
Size
code
D
L
A, B
H
I
W
P
K
B
4.0
5.4
+
-
0.1
0.2
4.3
5.5 max. 1.8
0.65±0.1
1.0
0.35^+-
0.15
0.20
C
5.0
5.4
+
-
0.1
0.2
5.3
6.5 max. 2.2
0.65±0.1
1.5
0.35^+-
0.15
0.20
D
6.3
5.4
+
-
0.1
0.2
6.6
7.8 max. 2.6
0.65±0.1
1.8
0.35^+-
0.15
0.20
E
8.0 6.2±0.3
8.3
9.5 max. 3.4
0.65±0.1
2.2
0.35^+-
0.15
0.20
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2
✽ This product qualify for AEC-Q200, but it has some deviations.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Mar. 2014
– EEE-35 –