EEE-1HA100WAR Datasheet, PDF (1/3 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ S

Aluminum Electrolytic Capacitors/ S
Surface Mount Type
S V ^Series:
Type:
S High temperature Lead-Free reflow (suffix:A✽)
■ Features
● Endurance: 85 °C 2000 h
● Vibration-proof product is available upon request.(φ8 mm and larger)
● RoHS directive compliant
■ Specifications
Category Temp. Range
–40 °C to +85 °C
Rated W.V. Range
6.3 V.DC to 50 V.DC
Nominal Cap. Range
0.1 µF to 1500 µF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
DC Leakage Current
I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
tan δ
Please see the attached High temperature lead-free reflow products list.
Characteristics
at Low Temperature
W.V. (V)
6.3 10 16 25 35 50
Z(–25 °C)/Z(+20 °C) 4 3 2 2 2 2
Z(–40 °C)/Z(+20 °C) 8 6 4 4 3 3
(Impedance ratio at 120 Hz)
After applying rated working voltage for 2000 hours (Miniaturization product type 1000 hours)
at +85 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meer the following limits.
±20 % of initial measured value
Endurance
Size code
Capacitance change
D8(φ6.3҂7.7)
Cap. change
2000 hours ±25 %
< D(φ6.3) Miniature
1000 hours ±30 %
tan δ
< 200 % of initial specified value
DC leakege current
< initial specified value
Shelf Life
After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Resistance to
Soldering Heat
Capacitance change
tan δ
±10 % of initial measured value
< initial specified value
DC leakage current
< initial specified value
■ Frequency correction factor for ripple current
Correction factor
50, 60
0.70
Frequency (Hz)
120
1k
1.00
1.30
10 k to
1.70
■ Marking
Example:6.3 V 22 µF (Polarized)
Marking color: BLACK
■ Dimensions in mm (not to scale)
0.3 max.
A±0.2
–
(Unit : mm)
Negative polarity marking (–)
Capacitance (µF)
22
6S
Lot number
Series indentification
(S) or (A)
Mark for Lead-Free
Products
Black Dot (Square)
Rated voltage Mark (V.DC)
(6=6.3 V.DC)
+
L
Pressure Relief (φ10 and larger)
W
( ) Reference size
Size
code
B
C
D
D8
E
F
G
D
4.0
5.0
6.3
6.3
8.0
8.0
10.0
L
5.4
+0.1
-0.2
5.4
+0.1
-0.2
5.4
+0.1
-0.2
7.7±0.3
6.2±0.3
10.2±0.3
10.2±0.3
A, B
H.
4.3 5.5 max
5.3 6.5 max
6.6 7.8 max
6.6 7.8 max
8.3 9.5 max
8.3 10.0 max
10.3 12.0 max
I
W
P
K
1.8
0.65±0.1
1.0
0.35
+0.15
-0.20
2.2
0.65±0.1
1.5
0.35
+0.15
-0.20
2.6
0.65±0.1
1.8
0.35
+0.15
-0.20
2.6
0.65±0.1
1.8
0.35
+0.15
-0.20
3.4
0.65±0.1
2.2
0.35
+0.15
-0.20
3.4 0.90±0.2 3.1 0.70±0.20
3.5 0.90±0.2 4.6 0.70±0.20
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EEE-6 –
00 Nov. 2012