|
EEE-1CA471UP Datasheet, PDF (1/5 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ S | |||
|
Aluminum Electrolytic Capacitors/ S
Surface Mount Type
S V Series:
Type:
â Features
â Endurance: 85 °C 2000 h
â Vibration-proof product is available upon request. (08 mm and larger)
â AEC-Q200 qualiï¬edâ½
â RoHS directive compliant
â Specifications
Category Temp. Range
â40 °C to +85 °C
Rated W.V. Range
4 V.DC to 100 V.DC
Nominal Cap. Range
1 μF to 1500 μF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
DC Leakage Current
I < 0.01 CV or 3 (μA) (Bi-Polar I < 0.02 CV or 6 (μA) After 2 minutes (Whichever is greater)
tan d
Please see the attached standard products list
Characteristics
at Low Temperature
W.V. (V)
4 6.3 10 16 25 35 50 63 100
Z(â25 °C)/Z(+20 °C) 7 4 3 2 2 2 2 3 3 (Impedance ratio at 120 Hz)
Z(â40 °C)/Z(+20 °C) 15 8 6 4 4 3 3 4 4
After applying rated working voltage for 2000 hours (Bi-polar:1000 hours for each polarity) at +85 °C
±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits.
±20 % of inisial measured value
Size code
Rated W.V.
Cap. change
Endurance
Capacitance change B(04) to D, D8(06.3)
< D(06.3) Miniature
4 W.V
6.3 W.V
> 10 W.V
1000 hours ±30 %
1000 hours ±20 %
tan d
DC leakege current
< 200 % initial speciï¬ed value
< initial speciï¬ed value
Shelf Life
After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits speciï¬ed in Endurance. (With voltage treatment)
After reï¬ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Resistance to
Soldering Heat
Capacitance change
tan d
±10 % of initial measured value
< initial speciï¬ed value
DC leakage current
< initial speciï¬ed value
â Frequency correction factor for ripple current
Correction factor
50, 60
0.70
Frequency (Hz)
120
1k
1.00
1.30
10 k to
1.70
â Marking
Example:4V 33 μF (Polarized)
Marking color: BLACK
â Dimensions in mm (not to scale)
0.3 max.
A±0.2
â
(Unit : mm)
Negative polarity marking (â)
(No marking for the bi-polar)
Capacitance (μF)
4
Lot number
Series indentiï¬cation
(S) or (A)
Mark for Lead-Free
Products
Black Dot (Square)
Rated voltage Mark (V.DC)
(6=6.3 V.DC)
+
L
Pressure Relief (010 and larger)
W
( ) Reference size
Size
code
B
C
D
D8
E
F
G
D
4.0
5.0
6.3
6.3
8.0
8.0
10.0
L
5.4+-
0.1
0.2
5.4+-
0.1
0.2
5.4+-
0.1
0.2
7.7±0.3
6.2±0.3
10.2±0.3
10.2±0.3
A, B
H
I
4.3 5.5 max. 1.8
5.3 6.5 max. 2.2
6.6 7.8 max. 2.6
6.6 7.8 max. 2.6
8.3 9.5 max. 3.4
8.3 10.0 max. 3.4
10.3 12.0 max. 3.5
W
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
P
K
1.0
0.35
+
-
0.15
0.20
1.5
0.35
+
-
0.15
0.20
1.8
0.35
+
-
0.15
0.20
1.8
0.35
+
-
0.15
0.20
2.2
0.35
+
-
0.15
0.20
3.1 0.70±0.20
4.6 0.70±0.20
â½ This product qualify for AEC-Q200, but it has some deviations.
Design and speciï¬cations are each subject to change without notice. Ask factory for the current technical speciï¬cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Mar. 2014
â EEE-9 â
|
▷ |