|
EECSE0H224 Datasheet, PDF (1/1 Pages) Panasonic Semiconductor – Electric Double Layer Capacitors | |||
|
Electric Double Layer Capacitors (Gold Capacitor)
Stacked Coin Type
Series : SE
Features
â Endurance : +70 °C 1000 h
â Automatic insertion available
â RoHS compliant
Recommended applications
â Memory back-up for video and audio equipment,cameras, telephones, printers, data terminals,
rice cookers and intelligent remote controls.
Specifications
Category temp. range
â25 °C to +70 °C
Maximum operating voltage
5.5 V.DC
Nominal cap.range
0.22 F
Characteristics at
low temperature
Capacitance change ±30 % of initial measured value at +20 °C (at â25 °C)
Internal resistance < 5 times of initial measured value at +20 °C (at â25 °C)
After 1000 hours application of 5.5 V.DC at +70 °C, the capacitor shall meet the following limits.
Endurance
Capacitance change ±30 % of initial measured value
Internal resistance < 4 times of initial speciï¬ed value
Shelf life
After 1000 hours storage at +70 °C without load, the capacitor shall meet the speciï¬ed
limits for Endurance.
Dimensions in mm(not to scale)
5.4±0.8
P2
P
P1 F
â
+
fd
P0
fD0
Dimensions Nominal
Tolerance
â³h
â³h1
0d
0.55
±0.05
P0
12.7
±0.2
F
5.0
+0.8
â0.2
W
18.0
±0.5
â
+
W0
5.5 <
â
W1
9.0
±0.5
W2
0 to 3.0
â
H0
16.4
±0.5
0D0
4.0
±0.2
P
12.7
±1.0
P1
3.85
±0.50
P2
6.35
±1.00
(Unit : mm)
â³h, â³h1
H1
0
30.3 >
±1.0
â
Characteristics list
Maximum
operating
voltage
(V.DC)
5.5
Capacitance
(F)
0.22
Capacitance
tolerance
(F)
0.176 to 0.396
Internal resistance Recommended
(Initial speciï¬ed value) discharge current
(Ω) at 1kHz
(µA)
< 75
300 or less
Part number
EECSE0H224
Mass
(Reference value)
(g)
1.0
Min.
packaging
qâty
(pcs)
1000
Note: 1. When ordering please observe the minimum packaging quantity.
2. When the surface mount component goes through UV or a heat oven to afï¬x the adhesive glue, the capacitorâs surface
temperature should not exceed 100 °C for more than 60 seconds (maximum temperature should not exceed 105 °C)
3. Do not use reï¬ow soldering. (IR, Atmosphere heating methods, etc.)
Please refer to the page of âApplication guidelinesâ.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
05 Jan. 2016
|