EECRG0V224N Datasheet, PDF (1/1 Pages) Panasonic Semiconductor – Electric Double Layer Capacitors (Gold Capacitor)

Electric Double Layer Capacitors (Gold Capacitor)
Stacked Coin Type
Series : RG Low temperature assured product
Features
● _{Endurance : +85 °C 2000 h}
● _{Category temperature range : –40 °C to +85 °C}
● _{RoHS compliant}
Recommended applications
● _{Backup of data/RTC of base station, electronic meter, and industrial equipment}
Specifications
Category temp. range
–40 °C to +85 °C
Maximum operating voltage
3.6 V.DC
Nominal capacitance
0.22 F
1.0 F, 1.5 F
Characteristics at
low temperature
Capacitance change ±30 % of initial measured value at +20 °C (at –40 °C)
Internal resistance < 7 times of initial measured value at +20 °C (at –40 °C)
After 2000 hours application of maximum operating voltage at +85 °C
Endurance
Capacitance change ±30 % of initial measured value at 20 °C
Internal resistance
100 Ω or less (0.22 F)
40 Ω or less (1.0 F, 1.5 F)
After 2000 hours storage at +85 °C without load (voltage)
Shelf life
Capacitance change Capacitance change shall meet the specified limits for Endurance
Internal resistance Internal resistance shall meet the specified limits for Endurance
Dimensions in mm(not to scale)
RG series (0.22 F)
Terminal : V
Terminal : H
10.5 max.
5.0 max.
Sleeve
RG series (1.0 F, 1.5 F)
Terminal : V
Terminal : H
f19.0±0.3
5.5±0.5
Sleeve
0.8±0.05
(1.7)
0.2±0.05
5.0±0.8
11.5 max.
0.2±0.05
10.0±0.5
0.8±0.05
(1.7)
20.5 Max.
f19.0±0.3
1.0±0.1
–
5.0±0.5
+
0.20±0.05
20.0±0.5
0.2±0.05 1.0±0.1
(Unit : mm)
Characteristics list
Category
temp.
range
(°C)
Maximum
operating Capacitance
voltage
(F)
(V.DC)
Capacitance
tolerance
(F)
Internal
resistance Recommended ^✽1
(Initial specified value) discharge current
(Ω) at 1 kHz
Parts number
Mass
(Reference value)
(g)
Min.
packaging
q'ty
(pcs)
0.22 0.176 to 0.396 < 50 300 µA or less EECRG0V224( )N 1.0
200
–40 to +85 3.6
1.0
0.8 to 1.8
< 20
1 mA or less EECRG0V105( )N 4.1
100
1.5
1.2 to 2.7
< 20
1 mA or less EECRG0V155( )N 4.2
100
( ) : Please use V or H to indicate terminal type.
✽1 The recommended discharge current is a reference value. Please design your equipment(circuit) in consideration of IR drop.
Do not use reflow soldering. Please refer to the page of “Application guidelines”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Aug. 2016