|
EECRG0V224 Datasheet, PDF (1/1 Pages) Panasonic Semiconductor – Electric Double Layer Capacitors (Gold Capacitor)/ RG | |||
|
Electric Double Layer Capacitors (Gold Capacitor)/ RG
Stacked Coin Type
Series: RG
â Features
â Endurance: 85 °C 2000 h
â Can be discharged mA current
â RoHS directive compliant
â Recommended Applications
â Backup of data/RTC of base station, electronic meter,
and industrial equipment
â For assist of rapid load change
â Speciï¬cations
Series
RG
Category temp. range
â25 °C to +85 °C
Maximum operating voltage
3.6 V DC
Nominal capacitance
0.22 F
1.0 F
Capacitance tolerance
â20 % to +80%
Stability at low and high
temperature
Lower category temp. (â25 °C)
Upper category temp. (+85 °C)
Capacitance change ±30 % of initial measured value at 20 °C ±30 % of initial measured value at 20 °C
Internal resistance <5 times of initial measured value at 20 °C < initial measured value at 20 °C
After 2000 hours application of maximum operating voltage at +85 °C
Endurance Capacitance change ±30 % of initial measured value at 20 °C ±30 % of initial measured value at 20 °C
Internal resistance
100 È or less
40 È or less
After 2000 hours storage at +85 °C without load (voltage)
Shelf life Capacitance change
Capacitance change shall meet the speciï¬ed limits for Endurance
Internal resistance
Internal resistance shall meet the speciï¬ed limits for Endurance
â Dimensions in mm(not to scale)
RG series 0.22(F)
Terminal : V
10.5 max.
5.0 max.
Terminal : H
Sleeve
0.8±0.05
(1.7)
0.2±0.05
5.0±0.8
11.5 max.
0.2±0.05
10.0±0.5
0.8±0.05
(1.7)
RG series 1.0(F)
Terminal : V
Terminal : H
Ï19.0±0.3
5.5±0.5
Sleeve
20.0±0.5
Ï19.0±0.3
â
1.0±0.1 5.0±0.5
+
0.20±0.05
20.0±0.5 0.2±0.05 1.0±0.1
â Standard Products
Series
Maximum
operating
voltage
Capacitance
Internal resistance
(Initial speciï¬ed value)
Recommended
discharge current
(V DC)
(F)
(È) at 1 kHz
(mA)
Parts number
Mass
(g)
0.22
<50
1 or less
EECRG0V224() 1.0
RG
3.6
1.0
<20
20 or less
EECRG0V105() 4.1
Do not use reï¬ow sp;dering.(IR, Atmospherheating methods, etc.) Please refer to P195 âMounting Speciï¬cationsâ.
( ): Please use V or H to indicate terminal type.
The recommended discharge current is a reference value.
Please design your equipment(circuit) in consideration of IR dorop.
Min. packaging
Q'ty
(pcs)
200
100
Design and speciï¬cations are each subject to change without notice. Ask factory for the current technical speciï¬cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 Dec. 2009
â EE186 â
|