|
EECRF0H104_16 Datasheet, PDF (1/1 Pages) Panasonic Semiconductor – Stacked Coin Type | |||
|
Electric Double Layer Capacitors (Gold Capacitor)
Stacked Coin Type
Series : RF
Features
â Endurance : +85 °C 2000 h
â Can be discharged mA current
â RoHS compliant
Recommended applications
â Backup of data/RTC of base station, electronic meter, and industrial equipment
â For assist of rapid load change
Specifications
Category temp. range
â25 °C to +85 °C
Maximum operating voltage
5.5 V.DC
Nominal capacitance
0.1 F
0.68 F, 1.0 F
Characteristics at
low temperature
Capacitance change ±30 % of initial measured value at +20 °C (at â25 °C)
Internal resistance < 5 times of initial measured value at +20 °C (at â25 °C)
After 2000 hours application of maximum operating voltage at +85 °C
Endurance
Capacitance change ±30 % of initial measured value at 20 °C
Internal resistance
150 Ω or less (0.1 F)
40 Ω or less (0.68 F, 1.0 F)
After 2000 hours storage at +85 °C without load (voltage)
Shelf life
Capacitance change Capacitance change shall meet the speciï¬ed limits for Endurance
Internal resistance Internal resistance shall meet the speciï¬ed limits for Endurance
Dimensions in mm(not to scale)
Sleeve
9.5 max. 6±1
1.2±0.1
0.8±0.1
â
Cap (F)
0D (mm)
0.1
13.5 max
0.68, 1.0
21.5 max
+
(Unit : mm)
01.1±0.05
(Recommended)
Characteristics list
Maximum
operating
voltage
(V.DC)
Capacitance
(F)
Capacitance
tolerance
(F)
Internal resistance Recommended
(Initial speciï¬ed value) discharge current
(Ω) at 1 kHz
(mA)
0.1 0.080 to 0.180
< 75
3 or less
Parts number
EECRF0H104
Mass
(Reference value)
(g)
3.3
Min.
packaging
q'ty
(pcs)
200
5.5
0.68 0.544 to 1.224
< 20
20 or less
EECRF0H684
10.0
100
1.0
0.8 to 1.8
< 20
20 or less
EECRF0H105
10.0
100
Do not use reï¬ow soldering. (IR, Atmospherheating methods, etc.) Please refer to the page of âApplication guidelinesâ.
The recommended discharge current is a reference value. Please design your equipment(circuit) in consideration of IR dorop.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Jan. 2016
|