EEA-GA1C470B Datasheet, PDF (1/3 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/ GA

Radial Lead Type
Series: _GA Type: _A
■ Features
● Endurance : 105 °C 1000 h
● RoHS directive compliant
Aluminum Electrolytic Capacitors/ GA
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan d
–55 °C to +105 °C
10 V.DC to 50 V.DC
1.5 μF to 220 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
Please see the attached standard products list
Endurance
Shelf Life
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), for 1000 hours, when
the capacitors are restored to 20 °C, the capacitors shall meet the limits specified below.
Capacitance change ±20 % of initial measured value
tan d
< 200 % of initial specified value
DC leakage current < initial specified value
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
■ Frequency correction factor for ripple current
W.V.(V.DC)
10 to 50
Cap (μF)
60
1.5 to 220
0.85
Frequency (Hz)
120
1k
10 k
1.00
1.30
1.40
100 k to
1.55
■ Dimensions in mm(not to scale)
Sleeve
L±1.0
0d±0.05
+
–
14 min. 3 min.
0D±0.5
(Unit : mm)
Body Dia. 0D
4
5
6.3
8
Lead Dia. 0d
0.45
0.45
0.45
0.45
Lead space F
1.5
2.0
2.5
2.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Oct. 2013
– EEE-107 –