ECWU1123C9_16 Datasheet, PDF (1/3 Pages) Panasonic Semiconductor – Plastic Film Capacitors

Plastic Film Capacitors
Stacked Metallized PEN
Film Chip Capacitor
Type : ECWU(C)
Stacked metallized PEN film as dielectric with simple
mold-less construction
Features
● _{Small in size}
● _{For reflow soldering}
● _{RoHS directive compliant}
Recommended applications
● _{General purpose (Coupling, By-pass)}
Explanation of part number
1
2
3
4
5
6
7
8
9
10
11
12
E CWU
C
Product code
Dielectric &
construction
Rated voltage
1 100 V.DC
2 250 V.DC
Capacitance
Cap. Tol. Suffix Suffix
J ±5 %
K ±10 %
Code Tape width
9 12 mm
V 16 mm
1
2
3
4
5
6
7
8
9
10
11
E CWU 1 1 0 4 V 3 3
Product code
Dielectric &
construction
Rated voltage
1 100 V.DC
Capacitance
Suffix
Small in size, Cap. Tol. : ±5 %, Tape width : 12 mm
1
2
EC
Product code
3
4
WU
Dielectric &
construction
5
C
Suffix
6
7
8
9
10
11
12
2J
JV
Rated voltage
2J 630 V.DC
Capacitance
Cap. Tol. Suffix
J ±5 % _{Code Tape width}
V 16 mm
Specifications
Category temp. range
(Including temperature-rise on unit surface)
Rated voltage
Capacitance range
Capacitance tolerance
Dissipation factor (tan d)
Withstand voltage
Insulation resistance (IR)
Soldering conditions
– 55 °C to +125 °C
100 V.DC, 250 V.DC, 630 V.DC (Derating of rated voltage by 1.25 %/°C more than 85 °C)
100 V.DC 0.012 μF to 1.0 μF (E12)
250 V.DC 0.0010 μF to 0.12 μF (E12)
630 V.DC 0.022 μF, 0.027 μF, 0.033 μF
100 V.DC ±5 %(J), ±10 %(K) (C > 0.18 μF : ±10 %(K) Only)
250 V.DC ±5 %(J), ±10 %(K)
630 V.DC ±5 %(J)
tan d < 1.0 % (20 °C, 1 kHz)
Between terminals : Rated volt. (V.DC)×150 %, 60 s
C < 0.33 μF 100 V.DC, 250 V.DC, 630 V.DC : IR > 3000 MΩ (20 °C, 100 V.DC, 60 s)
C > 0.33 μF 100 V.DC : IR > 1000 MΩ∙μF (20 °C, 100 V.DC, 60 s)
100 V.DC Reflow soldering : 250 °C max. and 60 s max. at more than 220 °C
250 V.DC (Temp. at capacitor surface)
630 V.DC Reflow soldering : 250 °C max. and 60 s to 150 s. at more than 217 °C (Temp. at cap. surface)
✽ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage,
please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
✽ Please consult us for capacitance range between 0.15 μF and 1.0 μF. (250 V.DC)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Feb. 2016