ECWU1102JX5_16 Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Stacked Metallized PEN Film Chip Capacitor

Plastic Film Capacitors
Stacked Metallized PEN
Film Chip Capacitor
Type : ECWU(X)
Stacked metallized PEN film as dielectric with simple
mold-less construction
Features
● _{Small in size (minimum size 3.2 mm × 1.6 mm)}
● _{85 °C, 85 %RH, W.V. × 1.0 for 500 hours}
● _{For reflow soldering}
● _{RoHS directive compliant}
Recommended applications
● _{General purpose (Coupling, By-pass)}
Explanation of part number
1
2
3
4
5
6
7
8
E CWU 1
Product code
Dielectric &
construction
Rated voltage
1 100 V.DC
Capacitance
9
10
11
JX5
Cap. Tol. Suffix
J ±5 %
Suffix
Code Tape width
5 8 mm
Specifications
Category temp. range
(Including temperature-rise on unit surface)
Rated voltage
Capacitance range
Capacitance tolerance
Dissipation factor (tan d)
Withstand voltage
Insulation resistance (IR)
Soldering conditions
– 55 °C to +105 °C
100 V.DC
0.0010 μF to 0.010 μF (E12)
±5 %(J)
tan d < 1.0 % ( 20 °C, 1 kHz )
Between terminals : Rated volt. (V.DC)×150 %, 60 s
IR > 3000 MΩ (20 °C, 100 V.DC, 60 s)
Reflow soldering : 250 °C max. and 60 s max. at more than 220 °C
(Temp. at capacitor surface)
✽ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage,
please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
Construction
Element
(Stacked)
Dimensions
L±0.2
W±0.2
Outer
electrode
e±0.30 g
e±0.30
Unit : mm
Size
code
L
W
H
e
g
H2 3.2 1.6 1.1 0.65 > 1.0
H3 3.2 1.6 1.5 0.65 > 1.0
G2 3.2 2.5 1.5 0.65 > 1.0
G3 3.2 2.5 2.1 0.65 > 1.0
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Feb. 2016