ECWU1102JX5 Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Plastic Film Capacitors

Stacked Metallized PEN Film Chip Capacitor
Type: ECWU(X)
Plastic Film Capacitors
Stacked metallized PEN film as dielectric with simple
mold-less construction
I Features
•^{Small in size (minimum size 3.2 mm ✕ 1.6 mm)}
•^{85 ˚C, 85 %RH, W.V. ✕ 1.0 for 500 hours}
•^{For reflow soldering}
•^{RoHS directive compliant}
IRecommended Applications
•^{General purpose (Coupling, By-pass)}
IExplanation of Part Numbers
1
2
3
4
5
6
7
8
9
10
11
E CWU 1
JX5
Product code
Dielectric & Rated voltage
construction
Capacitance
1 100 VDC
Cap. Tol. Suffix Suffix
J ^±5 %
Tape width
5 8 mm
I Specifications
Category temp. range
(Including temperature-rise on unit surface)
–55 ˚C to +105 ˚C
Rated voltage
Capacitance range
Capacitance tolerance
Withstand voltage
Dissipation factor (tan )
Insulation resistance (IR)
Soldering conditions
100 VDC
0.0010 µF to 0.010 µF (E12)
±5 % (J)
Between terminals : Rated volt. (VDC)✕150 % 60 s
tan ^<₌1.0 % (20 ˚C, 1 kHz)
IR₌^>3000 MΩ (20 ˚C, 100 VDC, 60 s)
Reflow soldering : 240 ˚C max. and 60 s max. at more than 220 ˚C
(Temp. at cap. surface)
(Please consult us for Reflow 250 ˚C max product.)
❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage,
please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
I Construction
IDimensions in mm (not to scale)
size
code
L
W
H2 3.2 1.6
H3 3.2 1.6
G2 3.2 2.5
G3 3.2 2.5
He
g
1.1 0.65 _=>1.0
1.5 0.65 _=>1.0
1.5 0.65 _=>1.0
2.1 0.65 _=>1.0
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.