ECW-U1563JC9 Datasheet, PDF (1/13 Pages) Panasonic Semiconductor – Stacked Metallized PEN Film Chip Capacitor

Plastic Film Capacitors
Stacked Metallized PEN Film Chip Capacitor
Type: ECWU(C)
Stacked metallized PEN film as dielectric with simple
mold-less construction
■ Features
•^{Small in size}
•^{For reflow soldering}
•^{RoHS directive compliant}
■Recommended Applications
•^{General purpose (Coupling, By-pass)}
■Explanation of Part Numbers
1
2
3
4
5
6
7
8
9
10
11
12
E CWU
C
Product code
1
2
EC
Dielectric &
construction
3
4
WU
Rated voltage Nominal capacitance Cap. Tol. Suffix Suffix
1 100 VDC
2 250 VDC
J ^±5 %
K ^±10 %
Tape width
9 12 mm
5
6
7
8
9
10
11
V 16 mm
1 1 0 4V 3 3
Product code
1
2
EC
Dielectric & Rated voltage capacitance
construction
1 100 VDC
3
4
5
6
7
8
Suffix
Small in sizu, Cap. Tol.:±5 %, Tape width:12 mm
9
10
11
12
WU C 2 J
JV
Product code
Dielectric &
construction
■ Specifications
Suffix Rated voltage
2 630 VDC
capacitance
Cap. Tol. Suffix
J ^±5 %
Tape width
V 16 mm
Category temp.range
(Including temperature-rise on unit surface) ^{-55 ˚C to +125 ˚C}
Rated voltage
Capacitance range
Capacitance tolerance
Withstand voltage
Dissipation factor (tan )
Insulation resistance (IR)
Soldering conditions
100 VDC, 250 VDC, 630 VDC
(Derating of rated voltage by 1.25 %/˚C more than 85 ˚C)
100 VDC
0.012 µF to 1.0 µF (E12)
250 VDC
0.0010 µF to 0.12 µF (E12)
630 VDC
0.022 µF, 0.027 µF, 0.033 µF
100 VDC
250 VDC
±5 _%(J), ±10 _{%(K) (C=}^>_{0.18 µF :} ±10 _%(K)only)
±5 _%(J), ±10 _%(K)
630 VDC
±5 _%(J)
Between terminals: Rated volt. (VDC)✕150 % 60 s
tan ^<₌1.0 %(20 ˚C, 1 kHz)
C^<₌0.33 µF
100 VDC, 250 VDC, 630 VDC : IR=>3000 MΩ · (20 ˚C,100 VDC, 60 s)
C>0.33 µF
100 VDC : IR=>1000 MΩ · µF (20 ˚C,100 VDC, 60 s)
100 VDC
250 VDC
Reflow soldering : 240 ˚C max. and 60 s max. at more than 220 ˚C (Temp. at cap. surface)
(Please consult us for Reflow 250 ˚C max. product.)
630 VDC
Reflow soldering : 250 ˚C max. and 60 s to 150s. at more than 217 ˚C
(Temp. at cap. surface)
❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please
refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
❈ Please consult us for capacitance range between 0.15 µF and 1.0 µF. ( 250 VDC)
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
ʵ '$ ʵ