ECQ-V1H474JL2 Datasheet, PDF (1/10 Pages) Panasonic Semiconductor – Stacked Metallized PPS Film Chip Capacitor

Plastic Film Capacitors
Stacked Metallized PPS Film Chip Capacitor
Type: ECHU(X)
Stacked metallized PPS film as dielectric with simple
mold-less construction
■ Features
•^{Small in size (minimum size 1.6 mm ✕ 0.8 mm)}
•^{85 ˚C, 85 %RH, W.V. ✕ 1.0 for 500 hours}
•^{For reflow soldering}
•^{RoHS directive compliant}
■Recommended Applications
• ^{Time-constant}
• ^Filtering
•^{Oscillation and resonance}
■Explanation of Part Numbers
1
2
3
4
5
6
7
8
ECHU
9
10
11
12
X
Product code
Dielectric &
construction
Rated voltage
1C 16 VDC
1H 50 VDC
■ Specifications
Capacitance
Cap. Tol. Suffix Suffix
G ^±2 %
J ^±5 %
Tape width
Reel diameter ^❈ Tape width 8 mm
5
8 mm
size ø180 mm
and diameter
ø330 mm reel is
9
12 mm
size ø330 mm
prepared.
Category temp. range
(Including temperature-rise on unit surface)
ʵ55 ˆ to ʴ125 ˆ
Rated voltage
Capacitance range
Capacitance tolerance
Withstand voltage
Dissipation factor (tan )
Insulation resistance (IR)
Soldering conditions
16 VDCɼ50 VDC
(50 VDC: 0.12 µF or more: Derating or rated voltage by 1.25 % / ˆat more than 105 ˆ)
0.00010 µF to 0.22 µF (E12)
±2 _%(G), ±5 _%(J)
Between terminals : Rated volt. (VDC)✕150 % 60 s
tanЎʽ0.6 % (20 ˆ, 1 kHz)
16 VDCɿIRʾ3000 MЊ (20 ˆ, 10 VDC, 60 s)
50 VDCɿIRʾ3000 MЊ (20 ˆ, 50 VDC, 60 s)
Reflow soldering : 260 ˚C max. and 95 sec max. at more than 220 ˚C (Temp. at cap. surface)
❈ Please consult us for flow soldering
❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please
refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
■ Construction
■Dimensions in mm (not to scale)
saize
code
L
W
H
e
g
K1 1.6 0.8 0.7 0.35 ʾ0.4
J1 2.0 1.25 0.9 0.45 ʾ0.6
J2 2.0 1.25 1.1 0.45 ʾ0.6
H1 3.2 1.6 0.9 0.65 ʾ1.0
H2 3.2 1.6 1.1 0.65 ʾ1.0
H3 3.2 1.6 1.5 0.65 ʾ1.0
G1 3.2 2.5 1.1 0.65 ʾ1.0
G2 3.2 2.5 1.5 0.65 ʾ1.0
G3 3.2 2.5 2.1 0.65 ʾ1.0
E1 4.8 3.3 1.5 0.80 ʾ2.0
E2 4.8 3.3 2.1 0.80 ʾ2.0
D1 6.0 4.1 1.9 0.80 ʾ2.0
D3 6.0 4.1 2.5 0.80 ʾ2.0
D4 6.0 4.1 2.8 0.80 ʾ2.0
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
ʵ '$ ʵ