ECQ-UAAF474M Datasheet, PDF (1/3 Pages) Panasonic Semiconductor – Metallized Polypropylene Film Capacitors

Plastic Film Capacitors
Metallized Polypropylene Film Capacitors
Type: ECQUA [Class X2]
In accordance with UL/CSA and European safety
regulation class X2
Equipped with a safety mechanism
■ Features
•^Compact
•^{Flame-retardant plastic case and non-combustible resin}
•^{RoHS directive compliant}
■Recommended Applications
•^{Interference suppressors}
■ Explanation of Part Numbers
1
2
3
4
5
6
7
8
9
10
11
12
E CQUAA F
Product code
Dielectric &
construction
Rated voltage
Capacitance
Cap.tol. Suffix
K ±10 %
M ±20 %
Blank
A
Straight
Cut lead
■Applicable Standard
UL
CSA
UL 60384-14
Across-The-Line Capacitors
Antenna-Coupling and Line-By-Pass Components
CAN/CSA E60384-14
Across-the-line capacitors
Antenna-isolation and line-by-pass capacitors
(0.10 µF to 2.2 µF)
(0.10 µF to 2.2 µF)
Accredited
by UL
Europe
EN60384-14
Class X2
(0.10 µF to 2.2 µF) Accredited
lnternational IEC60384-14
Class X2
(0.10 µF to 2.2 µF) by VDE
❈ When applying this capacitor to European and American safety standards, please use type designation and rating
such as ECQUA, 0.1 µF.
❈ Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the
latest file No
■ Specifications
Category temp. range
Rated voltage
Capacitance range
Capacitance tolerance
Dissipation factor (tan )
-40 ˚C to +110 ˚C
275 VAC (Safety standard approval)
0.10 µF to 2.2 µF
± _{10 % (K),} ± _{20 %(M)}
C^<₌1.0 µF : tan ^<₌0.1 % (20 ˚C, 1 kHz)
C^<>1.0 µF : tan ^<₌0.2 % (20 ˚C, 1 kHz)
Withstand voltage
Between terminals: 633 VAC, 1183 VDC 60 s
Between terminals to enclosure:2050 VAC 60 s
Insulation resistance (IR)
C^<₌0.33 µF : IR₌^>15000 MΩ (20 ˚C, 100 VDC, 60 s)
C>0.33 µF : IR₌^>5000 MΩ · µF (20 ˚C, 100 VDC, 60 s)
C^<₌0.47 µF : IR₌^>2000 MΩ (20 ˚C, 500 VDC, 60 s)
Maximum AC voltage ❈
310 VAC
❈ Use of this capacitor is limited to AC voltage (50 Hz or 60 Hz sine wave).
❈ A faint corona discharge may occur inside of the capacitor element at rated voltage, however there is no
influence on the reliability of the capacitor. (Suitable for series to the mains usage - for more details, please
contact your Panasonic contact person.)
❈ Maximum AC voltage including line voltage fluctuation is 310V AC.
310VAC is not nominal continuous applied voltage, but only indicates maximum value including in the voltage of
the power supply. Basic nominal voltage is considered as 240V AC.
This maximum AC voltae is specified in only ECQUA type, not specified in other types.
Please refer to individual product specification, and contact us for further questions regarding design life.
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
ʵ '$ ʵ