ECQ-E2103KB Datasheet, PDF (1/7 Pages) Panasonic Semiconductor – Metallized Polyester Film Capacitor

Plastic Film Capacitors
Metallized Polyester Film Capacitor
Type: ECQE(B)
Non-inductive construction using metallized polyester
film with flame retardant epoxy resin coating
■ Features
•^{Small size}
•^{Excellent electrical characteristics}
•^{Flame retardant epoxy resin coating}
•^{RoHS directive compliant}
■Recommended Applications
•^{General purpose usage}
❈Please contact us when applications are CD , ignitor etc.
■Explanation of Part Numbers
1
2
3
4
5
6
7
8
9
10
11
12
ECQE
B
Products code
Dielectric &
construction
Rated voltage
2 250 VDC
1A 125 VAC
Capacitance
Cap.Tol.
J ^±5 %
K ^±10 %
■Explanation of Part Numbers for Odd Size Taping
Suffix
Suffix
Blank
B
Z
2
3
6
Suffix
Lead Form
Straight
Crimped lead
Cut lead
Straight taping (Ammo)
Crimped taping (Ammo)
Crimped taping (Ammo)
ECQE
R
B
Products code
Dielectric &
construction
Rated voltage
Capacitance
Suffix Cap. Tol. Suffix
■ Specifications
Category temp. range
(Including temperature-rise on unit surface)
Rated voltage
Capacitance range
Capacitance tolerance
Dissipation factor (tan )
Withstand voltage
250 VDC – 40 ˚C to + 105 ˚C
125 VAC – 40 ˚C to + 105 ˚C
250 VDC, 125 VAC
(250 VDC : Derating of rated voltage by 1.25 %/˚C at more than 85 ˚C)
0.010 µF to 4.7 µF
±5 _%(J), ±10 _%(K)
tan ^<=1.0 % (20 ˚C, 1 kHz)
Rated volt. 250 VDC
Between terminals : Rated vol. (VDC)✕150 % 60 s
Rated volt. 125 VAC
Between terminals : Rated volt. (VAC)✕230 % 60 s
Between terminals to enclosure:1500 VAC 60 s
Insulation resistance (IR)
250 VDC
125 VAC
C^<₌0.33 µF : IR₌^>9000 MΩ (20 ˚C, 100 VDC, 60 s)
C>0.33 µF : IR₌^>3000 MΩ ^. µF (20 ˚C, 100 VDC, 60 s)
C^<₌0.47 µF : IR₌^>2000 MΩ (20 ˚C, 500 VDC, 60 s)
C>0.47 µF : IR₌^>3000 MΩ ^. µF (20 ˚C, 100 VDC, 60 s)
❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage,
please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
❈ Voltage to be applied to ECQE1A (B) is only sine wave (50 Hz or 60 Hz).
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
ʵ '$ ʵ