ECPU1C104MA5_16 Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Stacked Metallized Plastic Film Chip Capacitor

Plastic Film Capacitors
Stacked Metallized Plastic
Film Chip Capacitor
Type : ECPU(A)
Stacked dielectric and inner electrode with simple
mold - less construction
Features
● _{Low ESR}
● _{Max. capacitance values 1.0 μF}
● _{Smallest package size in film capacitors 3225/1.0 μF}
● _{For reflow soldering}
● _{RoHS directive compliant}
Recommended applications
● _{Noise suppressor}
● _Coupling
Explanation of part number
1
2
3
4
ECPU
Product code
Dielectric &
construction
5
6
7
8
9
1C
Rated voltage
1C 16 V.DC
Capacitance
10
11
12
MA 5
Cap. Tol. Suffix
Suffix
Code Tape width
5 8 mm
Specifications
Category temp. range
(Including temperature-rise on unit surface)
– 40 °C to +85 °C
Rated voltage
16 V.DC
Capacitance range
0.10 μF to 1.0 μF (E6)
Capacitance tolerance
±20 %(M)
Dissipation factor (tan d)
tan d < 1.5 % ( 20 °C, 1 kHz )
Withstand voltage
Insulation resistance (IR)
Soldering conditions
Between terminals : Rated volt (V.DC)×150 %, 60 s
C < 0.33 μF : IR > 1000 MΩ (20 °C, 10 V.DC, 60 s)
C > 0.33 μF : IR > 300 MΩ ∙ μF (20 °C, 10 V.DC, 60 s)
Reflow soldering : 240 °C max. and 30 sec max. at more than 220 °C
(Temp. at capacitor surface)
✽ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage,
please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
Construction
Dimensions
Element
(Stacked)
Outer
electrode
L±0.2
W±0.20
e±0.30
g
(±0.25) ✽
e±0.30
(±0.25) ✽
✽ To be applied only for size code J1
Unit : mm
Size
code
L
WH
e
g
J1 2.0 1.25 1.0 0.45 > 0.6
H1 3.2 1.6 0.8 0.65 > 1.0
H2 3.2 1.6 1.0 0.65 > 1.0
H3 3.2 1.6 1.4 0.65 > 1.0
G2 3.2 2.5 1.4 0.65 > 1.0
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Feb. 2016