ECP-U01105MA5 Datasheet, PDF (1/5 Pages) Panasonic Semiconductor – Stacked Metallized Plastic Film Chip Capacitor

Plastic Film Capacitors
Stacked Metallized Plastic Film Chip Capacitor
Type : ECPU(A)
Stacked dielectric and inner electrode with simple
mold - less construction
■ Features
•^{Low ESR}
•^{Max. capacitance values 1.0 µF}
•^{Smallest package size in film capacitors 3225/1.0 µF}
•^{For reflow soldering}
•^{RoHS directive compliant}
■Recommended Applications
•^{Noise suppressor}
•^Coupling
■Explanation of Part Numbers
1
2
3
4
5
6
7
8
9
10
11
12
ECPU1C
MA 5
Product code
Dielectric &
construction
Rated
voltage.
Capacitance
Cap.tol Suffix Suffix
■ Specifications
1C 16 VDC
12 Tape width
5 8 mm
Category temp. range
(Including temperature-rise on unit surface)
Rated voltage
Capacitance range
Capacitance tolerance
Dissipation factor (tan )
Withstand voltage
- 40 ˚C to + 85 ˚C
16 VDC
0.10 µF to 1.0 µF (E6)
± _{20 % (M)}
tan ^<₌1.5 % (20 ˚C, 1 kHz)
Between terminais : Rated volt (VDC)x175 % 1 s to 5 s
Insulation resistance (IR)
C^<₌0.33 µF : IR₌^>1000 MΩ (20 :, 10 VDC, 60 s)
C>0.33 µF : IR₌^>300 MΩ · µF (20 :, 10 VDC, 60 s)
Soldering conditions
Reflow soldering : 240 ˚C max. and 30 sec max. at more than 220 ˚C
(Temp. at cap. surface)
❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage,
please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
■ Construction
■Dimensions in mm (not to scale)
Saize code _L
WH
e
g
J1 2.0 1.25 1.0 0.45 => 0.6
H1 3.2 1.6 0.8 0.65 => 1.0
H2 3.2 1.6 1.0 0.65 => 1.0
H3 3.2 1.6 1.4 0.65 => 1.0
G2 3.2 2.5 1.4 0.65 => 1.0
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
ʵ '$ ʵ