ECHU1C101X5_16 Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Plastic Film Capacitors

Plastic Film Capacitors
Stacked Metallized PPS Film
Chip Capacitor
Type : ECHU(X)
Stacked metallized PPS film as dielectric with simple
mold-less construction
Features
● _{Small in size (Minimum size 1.6 mm × 0.8 mm)}
● _{85 °C, 85 %RH, W.V. × 1.0 for 500 hours}
● _{For reflow soldering}
● _{RoHS directive compliant}
Recommended applications
● _{Time-constant}
● _Filtering
● _{Oscillation and resonance}
● _{Audio circuit}
Explanation of part number
1
2
3
4
5
6
7
8
9
10
11
12
ECHU
X
Product code
Dielectric &
construction
Rated voltage
1C 16 V.DC
1H 50 V.DC
Capacitance
G ±2 %
J ±5 %
Cap. Tol. Suffix Suffix
Code Tape width Reel diameter ✽ Tape width 8 mm
5
8 mm
f180 mm
and diameter
f330 mm reel is
9 12 mm f330 mm prepared
Specifications
Category temp. range
(Including temperature-rise on unit surface)
Rated voltage
Capacitance range
– 55 °C to +125 °C
16 V.DC, 50 V.DC
(50 V.DC : 0.12 μF or more : Derating or rated voltage by 1.25 % / °C at more than 105 °C)
0.00010 μF to 0.22 μF (E12)
Capacitance tolerance
±2 %(G), ±5 %(J)
Dissipation factor (tan d)
Withstand voltage
Insulation resistance (IR)
tan d < 0.6 % (20 °C, 1 kHz)
Between terminals : Rated volt. (V.DC)×150 %, 60 s
16 V.DC : IR > 3000 MΩ (20 °C, 10 V.DC, 60 s)
50 V.DC : IR > 3000 MΩ (20 °C, 50 V.DC, 60 s)
Soldering conditions
Reflow soldering : 260 °C max. and 95 sec max. at more than 220 °C (Temp. at capacitor surface)
✽ Please consult us for flow soldering
✽ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage,
please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
Construction
Element
(Stacked)
Outer electrode
Dimensions
L±0.2
(±0.3) ✽ ✽ ✽
(±0.15) ✽ ✽
W±0.2
e±0.30 g
(±0.25) ✽
e±0.30
(±0.25) ✽
(±0.20) ✽ ✽
(±0.20) ✽ ✽ ✽
✽ To be applied only for size code J1, J2
✽✽ To be applied only for size code K1
✽✽✽ To be applied only for size code E1, E2, D1, D3, D4
Unit : mm
Size code L W H e g
K1 1.6 0.8 0.7 0.35 > 0.4
J1 2.0 1.25 0.9 0.45 > 0.6
J2 2.0 1.25 1.1 0.45 > 0.6
H1 3.2 1.6 0.9 0.65 > 1.0
H2 3.2 1.6 1.1 0.65 > 1.0
H3 3.2 1.6 1.5 0.65 > 1.0
G1 3.2 2.5 1.1 0.65 > 1.0
G2 3.2 2.5 1.5 0.65 > 1.0
G3 3.2 2.5 2.1 0.65 > 1.0
E1 4.8 3.3 1.5 0.80 > 2.0
E2 4.8 3.3 2.1 0.80 > 2.0
D1 6.0 4.1 1.9 0.80 > 2.0
D3 6.0 4.1 2.5 0.80 > 2.0
D4 6.0 4.1 2.8 0.80 > 2.0
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Feb. 2016