English
Language : 

ECG-C0JB220R Datasheet, PDF (1/4 Pages) Panasonic Semiconductor – Specialty Polymer Aluminum Electrolytic Capacitors/CB
Chip Type Specialty Polymer
Aluminum Electrolytic Capacitors
(SP Cap)
Series:CB
Specialty Polymer
Aluminum Electrolytic Capacitors/CB
Japan
s Features
q Low impedance at high frequency (10 kHz to
10 MHz) as low as ceramic capacitors
(Reduced ESR due to an applying speciality polymer
with high conductivity.)
q Excellent Noise-absorbent Characteristics
q Surface Mount (Reflow soldering method available)
q Very stable capacitance, impedance and ESR
against temperature
q Excellent endurance characteristics due to adoption
of solid electrolyte
q 4-terminal-construction helps further low impedance.
s Specifications
Operating Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
Dissipation Factor
Surge Voltage
Ð40 to +105 ûC
4 to 16 V.DC
2.2 to 82 µF
±20 % (120 Hz/+20 ûC)
I < 0.04 CV or 3 (µA) after 2 minutes (Whichever is the greater)
(4W.V.:0.06CV)
< 0.06 (120 Hz/+20ûC)
Rated Working Voltage ×1.25 (15 to 35 ûC)
Endurance
After applying rated working voltage for 1000 hours at +105 ûC, and then being
stabilized at +20 ûC, capacitor shall meet the following limits.
Capacitance change
D.F.
DC leakage current
±10 % of initial measured value
< Initial specified value
< Initial specified value
Moisture Resistance
After storing for 500 hours at +60 ûC, 90 % R.H.
Capacitance change
D.F.
DC leakage current
+40 %, Ð20 % of initial measured value (4W.V.:+60 %, Ð20 % 6.3W.V.:+50 %, Ð20 %)
< Initial specified value
(4W.V.,ECGC B
RA:<200 % of Initial specified value)
< Initial specified value
Permissible Current
Between Terminals with
Same Polarity
2 A DC max. (This shall be applicable only when each terminal is landed or the circuit
individually).
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
Ð EE225 Ð