ECEV6.3G0R1R Datasheet, PDF (1/9 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitor/V-G

Aluminum Electrolytic Capacitor/V-G
Surface Mount Type
Series: G ^{Type :} V
Discontinued
s Features Endurance :105°C 1000 h
sSpecification
Operating temp. range
Rated W.V. range
Nominal cap. range
Capacitance tol.
DC leakage current
-40 to + 105°C
6.3 to 50 V .DC
0.1 to 470 µ F
±20 % (120Hz/+20°C)
I < 0.01 CV or 3 (µ A) after 2 minutes (Whichever is the greater)
tan δ
(120Hz / +20°C)
W.V. 6.3 10 16 25 35 50
tan δ _{0.30 0.22 0.16 0.14 0.12 0.12}
Characteristics
at Low Temperature
Endurance
Shelf life
Resistance to
Soldering Heat
W.V. (V) 6.3 10 16 25 35 50
-25 / +20 °C 4 3 2 2 2 2 ( Impedance ratio at 120 Hz)
-40 / +20 °C 8
6
4
4
3
3
After applying rated working voltage for 1000 hours at +105 ± 2°C, and then being atabilized at
+20°C, capacitors shall meet following limits.
Capacitance change < ±20% of initial measured value
tan δ
< 200% of initial specified value
DC leakage current < initial specified value
After storage for 1000 hours at +105 ±2°C with no voltage applied and then being stabilized
at +20°C, capacitor shall meet the limits specified in “Endurance”.
After reflow soldering (230°C of peak temperature and reflow time less than 20 seconds.) and
then being stabilized at 20°C, capacitor shall meet the following limits, (Infrared ray oven is also
available.)
Capacitance change < ±10% of initial measured value
tan δ
< initial specified value
DC leakage current < initial specified value
sExplanation of Part Number
E
C
E
Common code
V
Shape
s Marking
G
W.V. code Series code Capacitance code
Suffix
Taping
R W=12 mm φ4(B)
P W=16 mm φ5,φ6.3,φ8x6.2(C,D,E)
P W=24 mm φ8x10.2, φ10x10.2(F,G)
s Dimensions in mm (not to scale)
Example : 50V22µF
0.3 max
@A±0.2 ( ) reference size
Rated voltage (V.DC)
(-): Negative polarity
marking
22
50 G
Capacitance (µF)
Series identification
E,F,G= L±0.3
L^+-00..21
w
(mm)
Size
code
D
L
A
H
I
B 4.0 5.4 4.3 5.5 MAX 1.8
C 5.0 5.4 5.3 6.5MAX 2.2
D 6.3 5.4 6.6 7.8MAX 2.6
E 8.0 6.2 8.3 9.5MAX 3.4
F 8.0 10.2 8.3 10.0MAX 3.4
G 10.0 10.2 10.3 12.0MAX 3.5
W
P
0.65 ±0.1 1.0
0.65±0.1 1.5
0.65± 0.1 1.8
0.65±0.1 2.2
0.90±0.2 3.1
0.90±0.2 4.6
K
0.35 -0.20 to +0.15
0.35 -0.20 to +0.15
0.35 -0.20 to +0.15
0.35 -0.20 to +0.15
0.70 ±0.2
0.70 ±0.2
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail.
Mar. 2005
Ñ EE3 Ñ