ECEG2CG182P Datasheet, PDF (1/3 Pages) Panasonic Semiconductor – Screw Terminal Type

Aluminum Electrolytic Capacitors/GNH
Screw Terminal Type
Series:GNH
Discontinued
s Features _{Endurance :105°C 2000 h}
High-voltage and large-capacitance
s Recommended Applications
For general-purpose inverter, power supply for
non-power failure, motor-control inverter
s Specifications
Japan
U.S.A.
Category temp. range
Rated W.V. Range
Nominal Cap. Range
-25 to + 105°C
160 to 400 V .DC
390 to 22000 µ F
Capacitance Tolerance
DC Leakage Current
-10 to +30% (120Hz/+20°C)
3ÖCV (µA) max.after 5 minutes application of rated working voltage at +20°C
C:Capacitance(µF) V: W.V. (V.DC)
Dissipation Factor
Please see the attached standard products list
After 2000 hours application of DC voltage with specified ripple current (< rated DC
working voltage ) at +105°C, the capacitor shall meet the following limits.
Endurance
Shelf Life
Capacitance change
D.F.
DC leakage current
±20% of initial measured value
<_{= 150 % of initial specified value}
<_{= initial specified value}
After storage for 1000hours at +105±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in “Endurance”.(With voltage treatment)
s Frequency Correction Factor for Ripple Current
W.V.(V)
φD(mm)
Freq.(Hz)
50
60
120
300
360
1k
10k to
36
0.80
0.86
1.00
1.07
1.08
1.12
1.17
160, 200
51, 64
77, 90
0.86
0.91
0.90
0.95
1.00
1.00
1.05
1.06
1.05
1.06
1.08
1.10
1.08
1.10
36
0.71
0.79
1.00
1.09
1.10
1.15
1.21
250, 350
51, 64
0.83
0.88
1.00
1.07
1.08
1.13
1.20
77, 90
0.85
0.90
1.00
1.05
1.06
1.11
1.20
36
0.65
0.74
1.00
1.09
1.10
1.16
1.22
400
51, 64
0.81
0.87
1.00
1.07
1.08
1.13
1.21
77, 90
0.85
0.90
1.00
1.05
1.06
1.11
1.20
s Dimensions in mm(not to scale)
P.V.C. sleeve
M5x12
Hexagonal-bolt
Vent
φD
F
64 28.6
77 31.8
90 31.8
L+4 max
9 max
s Mounting clamp
Type 1; φ36
2-3.5´7
59 max
48±1
6
Type 2
14
H
8.4
Type 3
120°
φ^D2
26 ^max
B
A
φD A B C
51 80.0 68.0 57.5
64 93.0 81.0 70.0
77 104.5 93.5 90.0
(mm)
E H max.
4.4 13
5.0 13
5.0 13
45_{° W1}
W2
φD φD1 φD2 W1
51 65.0 74.0 9.0
64 76.0 86.0 8.0
77 89.0 100.0 8.0
90 101.6 113.0 8.0
(mm)
W2
14.0
13.0
14.0
14.0
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail.
Mar. 2005
– EE191 –