ECEG1AU683P Datasheet, PDF (1/5 Pages) Panasonic Semiconductor – Screw Terminal Type

Aluminium Electrolytic Capacitors/GYU
Screw Terminal Type _Discontinued
Series:GYU
n Features Endurance : +85°C 2000 h
Japan
U.S.A.
n Recommended Applications
Suitable for the circuits of switching power supply,computer,inverter
n Specifications
Category temp. range
-40 to + 85°C
-25 to + 85°C
Rated W.V. Range
10 to 100 V .DC
160 to 250 V .DC
Nominal Cap. Range
5600 to 1000000 µ F
1200 to 27000 µ F
Capacitance Tolerance
-10 to +30% (120Hz/+20°C)
DC Leakage Current
3żCV ^{(µA) max. after 5 minutes application of rated working voltage +20°C}
C:Capacitance(µF) V: W.V. (V.DC)
Dissipation Factor
Please see the attached standard products list
Endurance
After 2000 hours application of DC voltage with specified ripple current (< rated DC working
voltage) at +85°C, the capacitor shall meet the following limits.
Capacitance change _{±20 % of initial measured value}
D.F.
<150 % of initial specified value
DC leakage current < initial specified value
Shelf Life
After storage for 1000hours at +85±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in ìEnduranceî.(With voltage treatment)
n Frequency Correction Factor for Ripple Current
W.V.(V)
φD(mm)
Freq.(Hz)
50
60
120
36
0.95
0.96
1.00
10 to 50
51, 64
0.97
0.98
1.00
77, 90
0.98
0.99
1.00
36
0.92
0.95
1.00
63, 80
51, 64
0.94
0.96
1.00
77, 90
0.96
0.97
1.00
36
0.90
0.94
1.00
100
51, 64
0.93
0.97
1.00
77, 90
0.95
0.98
1.00
160, 200
36
51, 64
0.80
0.86
1.00
0.86
0.91
1.00
77, 90
0.90
0.95
1.00
36
0.71
0.79
1.00
250
51, 64
0.83
0.88
1.00
77, 90
0.85
0.90
1.00
n Dimensions in mm (not to scale)
P.V.C. sleeve
M5x12
Hexagonal-bolt
300
1.02
1.01
1.01
1.06
1.05
1.03
1.06
1.04
1.02
1.07
1.05
1.05
1.09
1.07
1.05
Vent
L+4 max
9 max
360
1k
10k to
1.03
1.04
1.04
1.02
1.03
1.03
1.02
1.03
1.03
1.08
1.11
1.12
1.07
1.10
1.11
1.05
1.08
1.09
1.09
1.13
1.15
1.06
1.10
1.13
1.03
1.07
1.08
1.08
1.12
1.17
1.06
1.08
1.10
1.06
1.08
1.10
1.10
1.15
1.21
1.08
1.13
1.20
1.06
1.11
1.20
φD
F
36 13.0
51 22.0
64 28.6
77 31.8
90 31.8
n Mounting clamp
Type 1; φ36
2-3.5×7
59 max
48±1
6
Type 2
14
H
8.4
Type 3
120°
φ^D2
26 ^max
B
A
φDç A B C
51 80.0 68.0 57.5
64 93.0 81.0 70.0
77 104.5 93.5 90.0
(mm)
E H max
4.4 13
5.0 13
5.0 13
45_°
W1
W2
(mm)
φDç φD1 φD2 W1 W2
51 65.0 74.0 9.0 14.0
64 76.0 86.0 8.0 13.0
77 89.0 100.0 8.0 14.0
90 101.6 113.0 8.0 14.0
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail.
Mar. 2005
– EE177 –