ECEC2CB471BJ Datasheet, PDF (1/5 Pages) Panasonic Semiconductor – Snap-in Type

Aluminum Electrolytic Capacitors/ HB
Snap-in Type
Series: HB Type :_TS
n Features Endurance: 105°C 2000 h
20 to 25 % smaller than series TS-HA
RoHS directive compliant
n Recommended Applications
Smoothing circuits, AC adaptor
n Specifications
Country of Origin
Japan
U.S.A(ii)
Malaysia
(ii) Regarding USA product,
Please check PEDCA^,s
Catalog.
Category temp. range
Rated W.V. Range
-40 to + 105°C
160 to 250 V .DC
-25 to + 105°C
315 to 450 V .DC
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan δ
Frequency Correction
Factor for Ripple Current
330 to 2700 µ F
82 to 820 µ F
±20 % (120Hz/+20°C)
3√CV ^{(µA) max. after 5 minutes application of rated working voltage at +20°C.}
C:Capacitance(µF) V: W.V. (V.DC)
Please see the attached standard products list.
Frequency (Hz)
50
60
100 120
500
1k 10k to
Correction Factor 0.75 0.80 0.95 1.00
1.20
1.25 1.40
After 2000 hours application of DC voltage with specified ripple current ( < rated DC working
voltage) at +105°C, the capacitor shall meet the following limits.
Endurance
Shelf Life
Capacitance change _{±20 % of initial measured value}
tan δ
< 200 % of initial specified value
DC leakage current < initial specified value
After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment)
n Dimensions in mm (not to scale)
Polarity bar PET Sleeve
Vent
(10.0) 2-φ2.0±0.1
10.0±0.1
L+2.0 max
4.0 ± 0.5
Recommended PWB piercing plan
0.8⁺-^00..21
Terminal
2.0max (t= 0.8)
Bottom of can
1.5 ± 0.2
Standard terminal type does not require
terminal trimming process.
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately.
Mar.2006
 EE143 